China Outdoor Travel/Camping Pocket Smart Phone Holder Stabilizer Tripod Gimbal G6, Find details and Price about China Double Handles for Gimbal, Dual Handle Kit for Eimage Gimbal from Outdoor Travel/Camping Pocket Smart Phone Holder Stabilizer Tripod Gimbal G6
G6 Specifications | |
Material | Aluminum alloy |
Net Weight | 336g(without camera and battery) |
Max Payload | 130g |
Working Time | 12 Hours Charging the cameras when using:5 hours |
Charging | Charging via USB port |
Accessories | Type Camera Charging Cable*1 Micro USB Cable*1 26650 Battery*1 Carrying Bag*1 |
Camera Supported | G6 works with GoPro Hero 6/Hero 5 / HERO4 / HERO3+ / HERO3 / Yi 4K / AEE and other action cameras that have similar dimensions. It also could be compatible with Sony RX0 with the customized adapter. The maximum payload should be no more than 130 gram. |
Battery | 26650*1, 5000mAh, 3.7V. Charging via USB port is supported. (Note: The performance of splash-proof will be affected while charging.) |
Usage Time In Theory | Without charging the cameras:12 hours Charging the cameras when using:5 hours |
Charging Time | It take 12 hours to fully charge G6 with 5V/1A power adapter. It take 7 hours to fully charge G6 with 5V/2A power adapter. The Multi-used charger made by FeiyuTech is not compatible with the 26650 batteries. |
Splash-proof Grade | Only splash-proof. It is banned from using under water, and being exposed to salt water. |
Rotatable Range | Tilt: 360°(Unlimited) Roll: 320°(keep horizontal) Pan: 360°(Unlimited) |
Installation | -For GoPro cameras, it is fine to place tilt motor on either left or right side. The suggestion is to have the heavier side of camera next to tilt motor for better stability. -For Sony RX0, tilt motor should be placed on the right side( from the perspective of photographer ). |
How to balance | With the movement of cross arm to make gimbal balanced |
Power on/off | POWER ON/ OFF: Long press the function button, the display will show "FY" and release it when you hear the beep tone. |
Working Modes | Two-letter abbreviations for working modes: Panning mode--HF; Follow mode--AF; Lock mode--LK. Function Button Operations: 1. Single tap: Switch between panning mode (Default mode) and lock mode 2. Double tap: Follow mode, enter lock mode by single-tapping in this mode , and enter panning mode by single-tapping if in lock mode. 3. Triple tap: The lens can be rotated 180°in horizontal, working together with the function of manual lock, you can take a selfie or video with special angle. Double tap trigger button to reset to default position. 4. Quadruple tap: Auto-rotation Mode, perfectly fit for time-lapse. You can set up the start, the finish and the rotation route by hand in this mode. When setting is done, gimbal will be automatically rotated following pre-set route in a constant speed, which was set in App before (Find more details in the manual of G6). 5. Quintuple tap: Initialize the gimbal in order to get correct attitude parameters when it is not level or in abnormal status. Note: "Initing" shows up in the display after quintuple tapping function button. G6 automatically detects whether or not it is placed on a static flat surface (see below). Initialization will be done automatically once the gimbal is placed on a static flat surface, and "Success" will be displayed. Otherwise, G6 is keeping detecting and waiting. Please pick up gimbal and single tap function button to wake up it when initialization is done. Shutter Button Operations: Shutter button could control camera to take video when gimbal is connected with camera via WIFI. Please refer to the chapter "Connecting to camera" in the manual. Trigger Button Operations: 1. Press and hold: Enter lock mode. Release it to go back to the previous mode. 2. Double tap: Reset the gimbal, it will go back to panning mode no matter what current mode is, and three axis are reset to default position. Horizontal Adjustment button operations: Move it to the left or right to control roll axis to move up and down (Roll:±30°) in any of three modes, Setting button operations: 1. Long press: Switch to the interface for camera parameters 2. Single tap: Switch camera modes (camera needs to be connected)/go back to the main interface Manual Lock: Manually move camera to the desired position in any of three modes,and hold for half a second. New tilt and/or pan positions are automatically saved. |