Products

25ml, 50ml, 100ml Stainless Steel Hydrothermal Synthesis Autoclave Reactor with PTFE Lined

China 25ml, 50ml, 100ml Stainless Steel Hydrothermal Synthesis Autoclave Reactor with PTFE Lined, Find details about China Autoclave, Hydrothermal Synthesis Reactor from 25ml, 50ml, 100ml Stainless Steel Hydrothermal Synthesis Autoclave Reactor with PTFE Lined

Model NO.
KH-100
Pressure
Negative
Agitator Model
No
Tower Reactor Type
No
Heating
Outside Heating Device
Heat Transfer Structure
Combined
Automatic Grade
Automatic
Condition
New
Name of Commodity
Hydrothermal Synthesis Reactor
Model
Kh-100
Volume
100ml
Material of Kettle
SS304 Stainless Steel
Liner
PTFE/Ppl
Pressure of Kettle
No More Than 3MPa
Temp. Range
240/300 Degrees Celsius
Heating Rate
No More Than 5c/Min
Cooling Rate
No More Than 5c/Min
Advancing Working Temp
220/280 Degrees Celsius
Customization
Customized Is Accept
Corrosion Resistant
Yes
Net Weight
2.7kg
Gross Weight
3kg
Packing Dimension
200X200X100
Trademark
WollenLab
Transport Package
Carton Box or Plywood Box
Specification
200x200x100
Origin
China
HS Code
8419899090
Model NO.
KH-100
Pressure
Negative
Agitator Model
No
Tower Reactor Type
No
Heating
Outside Heating Device
Heat Transfer Structure
Combined
Automatic Grade
Automatic
Condition
New
Name of Commodity
Hydrothermal Synthesis Reactor
Model
Kh-100
Volume
100ml
Material of Kettle
SS304 Stainless Steel
Liner
PTFE/Ppl
Pressure of Kettle
No More Than 3MPa
Temp. Range
240/300 Degrees Celsius
Heating Rate
No More Than 5c/Min
Cooling Rate
No More Than 5c/Min
Advancing Working Temp
220/280 Degrees Celsius
Customization
Customized Is Accept
Corrosion Resistant
Yes
Net Weight
2.7kg
Gross Weight
3kg
Packing Dimension
200X200X100
Trademark
WollenLab
Transport Package
Carton Box or Plywood Box
Specification
200x200x100
Origin
China
HS Code
8419899090
Package size per unit product
13.00cm * 8.50cm * 8.50cm
Gross weight per unit product
3.000kg
Lead Time
3 days (1 - 1 Set)
To be negotiated ( > 1 Set)
25ml, 50ml, 100ml Stainless Steel Hydrothermal Synthesis Autoclave Reactor with PTFE Lined
 

Introduction:

hydrothermal synthesis reactor is the reactor that provides synthetic chemical substances in certain temperature and pressure conditions.


Features:
 

1. It is made of quality non-magnetic0Cr18Ni9Ti of stainless steel.
2. The kettle body and kettle cover are sealed by durable and reliable line seal structure with long-term stability to leak free seal.
3. Stainless steel chassis, stainless steel kettle body, stainless steel gland, stainless steel kettle cover and extended stainless steel rods.
4. With PTFE liner, double care, acid and alkali, resistant to high temperature of 200ºC
5. Thickening processing PTFE cover, not easy to soften.
6. Beautiful appearance, reasonable structure and easy to operate.
7. Good corrosion resistance.
25ml, 50ml, 100ml Stainless Steel Hydrothermal Synthesis Autoclave Reactor with PTFE Lined

ModelKH-25KH-50KH-100KH-150KH-200KH-250KH-300KH-500KH-1000
Volume25ml50ml100ml150ml200ml250ml300ml500ml1000ml
MaterialSS304 Stainless Steel Kettle; PTFE/PPL Liner
Pressure≤3Mpa
Temp. RangePTFE≤240ºC PPL≤300ºC (Highest Temperature)
Heating or Cooling Rate≤5ºC/Min
RemarksAdvancing working temp: 220ºC(PTFE), 280ºC (PPL); The highest pressure is 3Mpa.
 
25ml, 50ml, 100ml Stainless Steel Hydrothermal Synthesis Autoclave Reactor with PTFE Lined
Operation Steps:

1.Pour the reaction solvent into the PTFE/PPL liner and ensure the freaction solvent is less than 80% of volume.
2. Make sure that the bottom gasket of reactor is in the correct position (protrusion facing down), then place the PTEF/PPL liner and upper gasket, and tighten the kettle lid with a screw.
3. The hydrothermal synthesis reactor is placed in a heater and heated to a desired temperature (less than the specified safe use temperature) according to the specified temperature increase rate.
4. The kettle lid could be opened when you confirm that the temperature in the kettle is lower than the boiling point of the reaction solvent. When the temperature is to be cooled at the end of the reaction, it must be operated strictly in accordance with the specified cooling rate to facilitate safety and the service life of the reactor.
5. After confirming that the temperature in the reactor is lower than the boiling point of the reaction solvent, please loosen the kettle lid with a screw, and then open the kettle lid.
6. The hydrothermal synthesis reactor should be cleaned in time after use to avoid rust. The Sealing part of kettle and kettle lid should be carefully cleaned and protected from damage.
25ml, 50ml, 100ml Stainless Steel Hydrothermal Synthesis Autoclave Reactor with PTFE Lined
Our Services:

25ml, 50ml, 100ml Stainless Steel Hydrothermal Synthesis Autoclave Reactor with PTFE Lined
25ml, 50ml, 100ml Stainless Steel Hydrothermal Synthesis Autoclave Reactor with PTFE Lined
 

You Might Also Like