Products

Mch-6 300bar Italian Scuba Diving Screw Air Compressor Pump

China Mch-6 300bar Italian Scuba Diving Screw Air Compressor Pump, Find details about China Air Compressor, Screw Air Compressor from Mch-6 300bar Italian Scuba Diving Screw Air Compressor Pump

Model NO.
MCH-6
Model
Mch-6
Charging Rate
100L/Min-6m3/H-3.5cbm 
Filling Time Pressure
6.8L 0-300bar/20min 10L 0-20
Working Pressure
225bar/3200psi 300bar/4700psi
Driven by
Three-Phase Electric Motor
Power
3kw
Weight
39kg
Noise Pressure 
83 dB
Lubricating Oil Capacity
300cc (0.3L) 300ml
Trademark
China coal
Transport Package
Wooden Box or as Your Requirement
Origin
China
Model NO.
MCH-6
Model
Mch-6
Charging Rate
100L/Min-6m3/H-3.5cbm 
Filling Time Pressure
6.8L 0-300bar/20min 10L 0-20
Working Pressure
225bar/3200psi 300bar/4700psi
Driven by
Three-Phase Electric Motor
Power
3kw
Weight
39kg
Noise Pressure 
83 dB
Lubricating Oil Capacity
300cc (0.3L) 300ml
Trademark
China coal
Transport Package
Wooden Box or as Your Requirement
Origin
China
 

Introduction of MCH-6 300bar Italian Scuba Diving Screw Air Compressor Pump

300bar Air compressor 
Charging rate: 100 L/min 
Working pressure: 225 Bar - 300 Bar 
Driven by: Three phase electric motor zmwm02
MCH-6 300bar Breathing Air Respirator Filling Compressor is the smallest, lightest portable breathing air compressor in the whole industry, the petrol engine of MCH6 series only 37KG,can easily put in the trunk of the car,carry to use the site. It can be used in the fire, scuba diving, shooting, emergency rescue, chemical, oil field and other fields. MCH6 has high quality and its character of portable and simple design. The output of compressed air meets the criterion of EN12021.

Product Structure of MCH-6 300bar Italian Scuba Diving Screw Air Compressor Pump
Optional gasoline engine, three-phase, single-phase electric drive motor, V belt drive
Four cylinder level 4 high-pressure compressor
Stainless steel cooler between every level
Installed in the 400 bar high pressure on the compressor pressure gauge
1.2 meters high pressure air tube, joints according to the needs of you
Stainless steel fan cover
Two oil-water separator, two drain valve (optional automatic decontamination)
Activated carbon molecular sieve filtration system
To set pressure automatic stop, prevent the relief valve frequent rev. Jump, ensure safety and security

Main Parameter of MCH-6 300bar Italian Scuba Diving Screw Air Compressor Pump

ModelMCH-6/ET STANDARD
Charging Rate100L/Min-6m3/h-3.5CBM 
Filling Time Pressure6.8L 0-300Bar/20Min
10L 0-200Bar/20Min
Working Pressure225Bar/3200Psi
300Bar/4700Psi
Driven ByThree-Phase Electric Motor
Power3KW
DimensionsHeight: 35cm   Width: 65cm  Depth: 39cm
35*65*39cm
Weight39kg
Noise Pressure 83 db
No. Of Stages and Cylinders4
Lubricating Oil Capacity300cc (0.3L)
300ml
Lubricant Coltri Oil CE 750 
Coltri Oil CE 750 
FramePowder Coated Steel
Oil/Moisture SeparatorAfter Last Stage
FiltrationFilter Cartridge Activated Carbon and Molecule 
Full Load Amp11.5A(230V-50/60 HZ)
6.7A(400V-50/60 HZ
Interstage Coolers and After Coolers Stainless Steel
Breathing AirEN 12021 CGA 
Suction Filter2 Micro Paper--25 Micro Polyester
Full load Amp11, 5 A (230 V - 50/60Hz) 6, 7 A (400 V - 50/60Hz)
Safety valveOn the separator housing
 

Photos of MCH-6 300bar Italian Scuba Diving Screw Air Compressor Pump

Mch-6 300bar Italian Scuba Diving Screw Air Compressor PumpMch-6 300bar Italian Scuba Diving Screw Air Compressor PumpMch-6 300bar Italian Scuba Diving Screw Air Compressor PumpMch-6 300bar Italian Scuba Diving Screw Air Compressor Pump

You Might Also Like