China New Design Salt Spray Testing Equipment with Xenon, High and Low Temperature, Humidity, Rapid Temperature Change Test Instrument, Find details about China Paint Drying Chamber, Test Instrument from New Design Salt Spray Testing Equipment with Xenon, High and Low Temperature, Humidity, Rapid Temperature Change Test Instrument
1. Using LCD digital display color touch screen temperature and humidity controller, the temperature and humidity test curve can be completely recorded.
2. Control mode: temperature, humidity, temperature and humidity can be used to control the program.
3. Program group capacity: 140Pattern (group) 1400Step (segment) Each group of programs can be set up to Repest99 segment.
4. Each execution mode time can be arbitrarily set to 0-999 hours and 59 minutes.
5. Each group can arbitrarily set part of the cycle 1-999 times or all cycles 1-999 times.
6. With power-off memory function, after the power is restored, the last completed test can be continued.
7. Can be connected to the computer RS232 interface.
Specification
Model | DHS-YW-90 | DHS-YW-120 | DHS-YW-160 | DHS-YW-200 |
Inner size (cm) | 90x60x50 | 120x80x50 | 160x100x50 | 200x120x60 |
Outer size (cm) | 141x88x128 | 190x110x140 | 230x130x140 | 270x150x150 |
Humidity range | 20%~98% R.H.(10%-98%R.H/5%~98% R.H for special selection conditions) | |||
Temperature range | A:RT~80ºC, B:-20ºC,C:-40ºC | |||
Humidity range | 20%~98% | |||
Temperature and humidity analysis accuracy/uniformity | ±0.1ºC;±0.1%R.H./±1.0ºC;±3.0%R.H. | |||
Temperature and humidity control accuracy/fluctuation | ±1.0ºC;±2.0%R.H./±0.5ºC;±2.0%R.H. | |||
Laboratory temperature | Brine test method(NSS ACSS)35ºC±1ºC/ Corrosion resistant test method(CASS)50ºC±1ºC | |||
Pressure tank temperature | Brine test method(NSS ACSS)47ºC±1ºC/ corrosion resistant test method(CASS)63ºC±1ºC | |||
Brine temperature | 35ºC±1ºC 50ºC±1ºC | |||
Brine concentration | Add 0.26 g of copper chloride per liter in a 5% sodium chloride solution or a 5% sodium chloride solution (CuCl2 2H2O) | |||
Compressed air pressure | 1.00±0.01kgf/cm2 | |||
Amount of spray | 1.0~2.0ml/80cm2/h (At least 16 hours collected, averaged) | |||
PH value | 6.5~7.2 3.0~3.2 | |||
Spray method | Continuous method | |||
Power supply | AC380V 50Hz | AC380V 50Hz | AC380V 50Hz | AC380V 50Hz |