traveling spray irrigation irrigator for greenhouse irrigation

1. Introduction:
Generally speaking, one greenhouse uses one working track. One machine can irrigate a greenhouse. In order to save planting area, the transfer orbit usually set in above the greenhouse road. From the view of easy access to water and electricity,the area of the application of the sprinkle's road layout in the end of greenhouse is best.
The sprinkler is a kind of arms dual-track self-propelled sprinkler car, is the factory nursery production as well as the favorable tool, potted flower production. The irrigation uniformity, appropriate, timely and efficient characteristics is an important guarantee of success of greenhouse production, while artificial water does not have these benefits.



2. Characters:
Stainless steel frame remote stepless speed automatic reciprocating remote control sprinkler.
Stainless steel host frame (including: driving shaft, passive shaft, self-aligning bearing, type A belt pulley, nylon roller, belt tensioning device, sprinkler running guide device)
Variable speed motor.
Rectangular spray rod.
The case is plastic-sprayed, waterproof, sealed, stepless speed control, wireless remote control electric cabinet.
Aluminum spray rod.


3. Parameters: 
Operation speed: 4-16.5m/min
Spray rod length: Max 15m
Working stroke: Max 120m
Water quality requirements: Municipal tap water
Water inlet pressure: 2-5kgf/ cm2
Nozzle form: Fast conversion of imported three bit ,spray angle of 110 degrees, the opening pressure of 0.7 kgf/cm2
Corresponding flow rate: 0.56 l/min,1.65 l/min,2.46 l/min(Corresponding pressure3 kgf/cm2)
(If the use of a single nozzle, the model is: 11006VP)
Flow: 2.46l/min (user option)
Nozzle height: away from crops ≥400mm
Motor power:250W
Input power:200v/ph1/50Hz
Outline dimension: length900mm* width900mm*385mm
Total weight: About 50 kg