Products

Protective Disposal Surgical Ffp2 N95 Respirator Mask Machine

China Protective Disposal Surgical Ffp2 N95 Respirator Mask Machine, Find details about China Earloop Mask Making Machine, N95 Respirator Machine from Protective Disposal Surgical Ffp2 N95 Respirator Mask Machine

Capacity
35 PCS/Min
Materials
Aluminum
Compressor
0.6-0.8MPa
Power
4.5kw
Size
7.46m*1.2m*1.9m(Height)
Qualification Rate
99%
Ambient Lighting
300lux
Moto
Servo Moto
Trademark
OYADE
Transport Package
Film Protection or Wooden Package
Specification
based on production capacity
Origin
China (Mainland)
HS Code
8449009000
Capacity
35 PCS/Min
Materials
Aluminum
Compressor
0.6-0.8MPa
Power
4.5kw
Size
7.46m*1.2m*1.9m(Height)
Qualification Rate
99%
Ambient Lighting
300lux
Moto
Servo Moto
Trademark
OYADE
Transport Package
Film Protection or Wooden Package
Specification
based on production capacity
Origin
China (Mainland)
HS Code
8449009000
Protective Disposal Surgical Ffp2 N95 Respirator Mask Machine
Different configuration face mask machine
Tie-on band mask machine
500 pcs/min high-speed blank machine
120 pcs/min Servo motor welding machine
1000 pcs/min one-time mask forming machine with earloop
N95 full automatic machine
Cup mask machine
Fish type mask machine


Product Description
This machine is mainly used for N95 automatic forming: After unwinding the whole roll of material, it is loaded by roller driving. The cloth is automatically loaded, and the bridge of the nose bridge is pulled and unrolled. The mold is roll-welded to the edge band, cut and shaped by a rolling knife, and the forming mask is conveyed out through the back roller. The mask is sealed by manual ultrasonic welding, and the ear tape is manually welded by an ultrasonic spot welder.

Main function 
This machine is mainly used for N95 automatic forming: After unwinding the whole roll of material, it is loaded by roller driving. The cloth is automatically loaded, and the bridge of the nose bridge is pulled and unrolled. The mold is roll-welded to the edge band, cut and shaped by a rolling knife, and the forming mask is conveyed through the back roller, and the edge band is automatically sealed and the ear band is automatically welded;

Protective Disposal Surgical Ffp2 N95 Respirator Mask Machine



Product Specification 

Voltage: AC220V
Machine Size: 3825(L)*1365(M)*1900(H)mm
Production capacity: 30-50PCS / min, 50,000pcs/24hours
Equipment production qualification rate: 98-99% (except that the incoming materials do not meet the requirements and the employees do not operate properly)
Equipment failure rate: 2% (refers to the failure caused by the equipment itself)


Equipment Composition
  1. Pre-process: fully automated
    Automatic feeding and cutting body machine (automatic feeding, including nose bridge, embossing, cutting)
    capacity: 30-50 pcs/minute, 50,000pcs/24hours
  2. Post process: manual operation
    Edge sealing and cutting machine: manual operation 2-4S, 1 set
    Ear welding machine: manual operation 4-8S, 1 Set
    Capacity: 8-15 pcs/ minute, 17,000pcs/24 hours.
Semi-automatic equipment includes: 1 set main machine for mask body, 2 sets earloop welding machines, 2 sets sewing machines.
 

Environment Requirement
  • Color: Computer white paint or hard-plated inscription, oxidized color, stainless steel color, according to this standard without special instructions.
  • Machine Weight: ≤500kg Ground load requirements ≥300kg /m2
  • Voltage: AC220V±5%,50HZ,Power 6.5-8.5kw
  • Environment requirement: Temperature:10ºC~35ºC, Humidity: 5-35%HR, no flammable, no corrosive gas, no dust. (cleanliness no less than 100000)
  • Keep away from paint (gasoline), chemicals, acids, alkalis, and explosive or flammable materials.
  • Avoid proximate to machines that generate vibration.
  • Ambient lighting: above 300LUX.

Protective Disposal Surgical Ffp2 N95 Respirator Mask Machine


Protective Disposal Surgical Ffp2 N95 Respirator Mask Machine
 

You Might Also Like