Products

Supply J3 Cold-Rolled 0.2mm 0.3mm 0.4mm 0.8mm Thick 201 8K Mirror 2b No. 4 Hl Surface Finish Stainless 4X8 Steel Sheet/Plate, Stainless Steel Suppliers

China Supply J3 Cold-Rolled 0.2mm 0.3mm 0.4mm 0.8mm Thick 201 8K Mirror 2b No. 4 Hl Surface Finish Stainless 4X8 Steel Sheet/Plate, Stainless Steel Suppliers, Find details about China Stainless Steel J1 Coil, Cold Rolled from Supply J3 Cold-Rolled 0.2mm 0.3mm 0.4mm 0.8mm Thick 201 8K Mirror 2b No. 4 Hl Surface Finish Stainless 4X8 Steel Sheet/Plate, Stainless Steel Suppliers

Model NO.
J3
Stock
Stock
Delivery Time
Within 15 Days After Receiving The Deposit or L/C
Trade Term
Fob CFR CIF
Thickness
0.01~2mm
Material
201 304 316 304L 316L 321 309S 310S 400s, 904L
Colour
White
Tolerance
±1%
Special Use
Dx51d/Dx52D/Dx53D/Dx54D/S250gd/S350gd/S550
Surface
Ba/2b/No.1/No.3/No.4/8K/Hl/2D/1d
Trademark
TISCO BAOSTEEL POSCO LISCO BAOXIN
Transport Package
as You Wish
Specification
width: 100~2000mm Length: 1000~6000mm
Origin
China
HS Code
7219220000
Model NO.
J3
Stock
Stock
Delivery Time
Within 15 Days After Receiving The Deposit or L/C
Trade Term
Fob CFR CIF
Thickness
0.01~2mm
Material
201 304 316 304L 316L 321 309S 310S 400s, 904L
Colour
White
Tolerance
±1%
Special Use
Dx51d/Dx52D/Dx53D/Dx54D/S250gd/S350gd/S550
Surface
Ba/2b/No.1/No.3/No.4/8K/Hl/2D/1d
Trademark
TISCO BAOSTEEL POSCO LISCO BAOXIN
Transport Package
as You Wish
Specification
width: 100~2000mm Length: 1000~6000mm
Origin
China
HS Code
7219220000

Supply J3 cold-rolled 0.2mm 0.3mm 0.4mm 0.8mm thick 201 8k mirror 2b no.4 hl surface finish stainless 4x8 steel sheet/plate, stainless steel suppliers

The j3 stainless steel is 30% stronger than 304 as well as 430!  nikon j3 stainless steel also exhibits Extensibility and tensile strength than 304/430.  The main difference between nikon j4 &304 is the difference in their chemistries, especially the percentage of Ni. 304 contains a minimum of 8% Ni and the  j3 stainless steel has a minimum of only 0.8~1.5% Ni. The chromium content is also slightly lower, but as seen from the PRE, this is compensated to a large extent by increased nitrogen.

 Chemical Compositon% Mechanical Properties
Carbon(C)≤0.15 Poisson's ratio0.75 max
Manganese(Mn)7.5~13 Elongation%≥20
Silicon(Si)≤0.03 Tensile Strength(Mpa)≥635
Chromium(Cr)13.0~15.0 Yield Strength(Mpa)≥245
Nickl(Ni)0.8~1.5 Density7.93
Sulphur(S)≤1.0 Hardness HV≤255
Phosphorus(P)≤0.045   

Features

  • Automotive trim and molding/Difficult-to-form exhaust-system components, tubular manifolds, mufflers/Exhaust manifold and other exhaust-system components, catalytic converter shells, clamps.
  • Construction: Gutters and downspouts, roofing, siding.
  • Power generation: Heat Exchanger tubing.
  • Kitchenware: Cooking utensils, dishwashers, ovens.
  • Range hoods, Refrigerators, Skewers.

Applications

  • Accurate dimension
  • Suitable for heavy duty operation
  • corrosive resistant
  • heat resistant

  

 Surface--stainless steel coils / strips
Supply J3 Cold-Rolled 0.2mm 0.3mm 0.4mm 0.8mm Thick 201 8K Mirror 2b No. 4 Hl Surface Finish Stainless 4X8 Steel Sheet/Plate, Stainless Steel Suppliers
 
Surface FinishDefinitionApplication
2BThose finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster.Medical equipment, Food industry, Construction material, Kitchen utensils.
BAThose processed with bright heat treatment after cold rolling.Kitchen utensils, Electric equipment, Building construction.
NO.3Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001.Kitchen utensils, Building construction.
NO.4Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001.Kitchen utensils, Building construction, Medical equipment.
HLThose finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size.Building construction.
NO.1The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling.Chemical tank, pipe.


Yaoyi Warehouse
Supply J3 Cold-Rolled 0.2mm 0.3mm 0.4mm 0.8mm Thick 201 8K Mirror 2b No. 4 Hl Surface Finish Stainless 4X8 Steel Sheet/Plate, Stainless Steel Suppliers

Ningbo Yaoyi Stainless Steel Co. Ltd. was founded in 1996. Yaoyi covers an area of 50 acres, and near the Ningbo airport. Over the years, the company mainly produce and sell different kinds of stainless steel coils ,tubes and sheets. It also independently developed one kind of high tensile non-magnetic stainless steel-Y1 and one kind of hard magnetic stainless steel-Y6.  Also, other products like SUS 201, 202, 301, 301Ni7, 304 and 316 and so on.

Yaoyi keeps the industry-leading quality for years. Because it had technological improvement on cold rolling mill and the heat treating process. Yaoyi is good at producing high hardness and high-tensile coils. Also, we specialize in customized material for different clients.

Our strength is the relationships with our customers, suppliers, and employees.  Moreover, the quality management system (REGISTERED TO ISO 9001:2008) ensures our quality and the service.


Packaging and Transportation

Supply J3 Cold-Rolled 0.2mm 0.3mm 0.4mm 0.8mm Thick 201 8K Mirror 2b No. 4 Hl Surface Finish Stainless 4X8 Steel Sheet/Plate, Stainless Steel Suppliers

Test equipment
Supply J3 Cold-Rolled 0.2mm 0.3mm 0.4mm 0.8mm Thick 201 8K Mirror 2b No. 4 Hl Surface Finish Stainless 4X8 Steel Sheet/Plate, Stainless Steel Suppliers
 
FAQ
Q: How long is your delivery time?
A: Generally it is 5 -10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.
Q: DO YOU PROVIDE SAMPLES ? IS IT FREE OR EXTRA ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: WHAT IS YOUR TERMS OF PAYMENT ?
A:TT/LC Details as followings:
(1)100% T/T advance. ( For small order.)
(2) 30% T/T and balance against copy of documents.
(3)30% T/T advance, balance L/C at sight
(4) 30% T/T , balance L/C usance
(5)100% L/C usance.
(6)100% L/C at sight.


 

You Might Also Like