Products

ND YAG Laser Crystal

China ND YAG Laser Crystal, Find details about China YAG, ND Dopped from ND YAG Laser Crystal

Thickness/Diameter Tolerance
±0.05 mm
Wavefront Distortion
<Lambda/4@632nm
Trademark
FineWin
Transport Package
Level 1000 Ultra-Clean Room, 100 Level Ultra Clea
Specification
customized
Origin
China
Thickness/Diameter Tolerance
±0.05 mm
Wavefront Distortion
<Lambda/4@632nm
Trademark
FineWin
Transport Package
Level 1000 Ultra-Clean Room, 100 Level Ultra Clea
Specification
customized
Origin
China
 
Nd:YAG for use in industrial,medical,military and scientific applications. The ND:YAG continues as the best of the rare earth garnet materials that are characterized by four-level laser operation which permits low threshold pulse and cw operation.
 
Advantages of Nd:YAG Include
      High gain
     Low threshold
     High efficiency
     Low loss at 1.06μm
     Good thermal conductivity and thermal shock characteristics
     Mechanical strength
     High optical quality
     Material characteristics that allow for various modes of operation
(CW,pulsed,Q-switched,mode locked,and cavity dumped)
 
We produces a wide variety of finished laser product,as well as supplying Nd:YAG material.Our general Nd:YAG production capabilities include
      Slab-Custom Geometries
     Rod sizes form 2mm to 15mm in diameter and from 1mm to 220 mm in length
     Nd dopant concentrations beween 0.1 and 1.3%
     Polished and AR coated barrels
     MIL-C-675C adhesion,abrasion and humidity resistance
     Damage threshold of over 15 J/cm2  
     A wide variety of anti-reflection,partial reflector,high reflector and dichroic coatings
     Premium grade Nd:YAG,with lower wavefront distortion,is available upon request
 
Typical finished part specifications and tolerances are listed below.
 
Specifications
 
Material: Nd:YAG
Dopant concentration: As specified±0.1%
Diameter Tolerance: +0,-0.025mm
Length Tolerance: +/-0.5mm
Parallelism: <10 arc seconds
Perpendicularity: <5 arc minutes
Chamfer: 0.13±0.08mm at 45°
Barrel Finish: 50-80 micro-inch(RMS)
Wavefront Distortion: <λ/10 per inch @632.8nm
Extinction Ratio: >30Db
Surface Flatness: <λ/10  @632.8nm
Surface Quality: 10/5
Clear Aperture: >95%
Anti-Reflection Coating: R<0.15%@1064nm per surface
High-Reflection Coating: Standard HR coating with R>99.8%@1064nm and R<5% @808nm		 

 
ND YAG Laser Crystal


 

You Might Also Like