OEM Genuine Genset Generator Controller Deepsea Dse7310
China OEM Genuine Genset Generator Controller Deepsea Dse7310, Find details about China Generator Controller, Controller Panel from OEM Genuine Genset Generator Controller Deepsea Dse7310
Basic Info.
Model NO.
DSE7310-03
Continuous Voltage Rating
8 V to 35 V Continuous 5 V for up to 1 Minute
Voltage Range
15 V to 415 V AC (pH to N) 25 V to 719 V AC (pH to
Maximum Operating Current
510 Ma at 12 V, 240 Ma at 24 V
Maximum Standby Current
330 Ma at 12 V, 160 Ma at 24 V
Frequency Range
3.5 Hz to 75 Hz
Panel Cutout Size
220 mm X 160 mm
Trademark
MAMO
Transport Package
Carton
Specification
DC SUPPLY
Origin
UK
HS Code
8503009090
Model NO.
DSE7310-03
Continuous Voltage Rating
8 V to 35 V Continuous 5 V for up to 1 Minute
Voltage Range
15 V to 415 V AC (pH to N) 25 V to 719 V AC (pH to
Maximum Operating Current
510 Ma at 12 V, 240 Ma at 24 V
Maximum Standby Current
330 Ma at 12 V, 160 Ma at 24 V
Frequency Range
3.5 Hz to 75 Hz
Panel Cutout Size
220 mm X 160 mm
Trademark
MAMO
Transport Package
Carton
Specification
DC SUPPLY
Origin
UK
HS Code
8503009090
Package size per unit product
25.00cm * 19.00cm * 6.00cm
Gross weight per unit product
1.000kg
Lead Time
7 days (1 - 1 Pieces)
To be negotiated ( > 1 Pieces)
To be negotiated ( > 1 Pieces)
Product Desciption
PRODUCT HIGHLIGHTS
KEY FEATURES
KEY BENEFITS
Configurable power-up mode.
Choose to power up the module in stop / manual / auto mode.
MPU fail delay.
If an MPU failure is detected the alarm can be delayed to allow for transient in the signal.
Enhanced graphical user interface.
Major design changes added to V7 to make the GUI easier to understand.
Drag and drop advanced PLC editor.
Powerful PLC editor functionality as standard.
MSC ID within PLC GenComm override.
PLC logic can be created to change the MSC ID to avoid having to use DSE Configuration Suite on-site.
CAN support for the DSEA108 AVR.
Full communication with the DSEA108 over CAN. The DSEA108 information is displayed on the front display of the control module.
Supports 7 languages.
English and 6 alternative languages can be stored in the control module.
Crank disconnect on generator voltage.
Provides the ability to crank disconnect on generator voltage.
Oil pressure disconnect delay.
Delays the crank disconnect on oil pressure to compensate for cold oil.
DSE25XX MKII supported over DSENet®.
Increases the number of supported DSE25XX MKII to two by allowing a single DSE25XX MKII to communicate over DSENet®.
Charge alternator disable functionality.
Charge alternator support can be disabled. This removes all related information from the front panel editor and SCADA.
3 digital input functions added to allow ECU specific operations.
Provides additional flexibility by allowing users to turn on additional engine functionality on supported electronic engines.
Supports escape mode.
Allows an engine to be run when it has received a shutdown command related to efficiency limits.
Configurable icon screens.
Icon layout on module screens can be configured to suit individual applications.
4-line back-lit LCD text display
Provides comprehensive and clear indication of operation and parameters.
Five key menu navigation
Provides convenient and flexible navigation of parameters.
Support for up to three remote display units
Provides the option to mimic the main control module up to 1.2 km.
Configurable inputs (8)
Provides multiple installation options.
Configurable analogue / digital inputs (6)
Provides flexibility for multiple installation options.
Configurable outputs (8)
Provides multiple installation options.
Tier 4 CAN engine support.
Ensures the control module can be used with the latest in modern electronic engine technology.
Manual fuel pump control.
Allows the fuel tank to be filled to provide reassurance of system operation.
Power monitoring (kW h, kVAr, kv Ah, kV Ar h), reverse power protection, kW overload protection.
Provides clear accurate power measurement information.
Configurable CT positioning.
The CT can be placed in the Generator output to provide current readings and protection or alternatively placed in the main load output to provided generator and mains (utility) readings and protection.
Data logging facility
Provides current and historical status information.
Customisable power up text and images
Company logo can be uploaded to the start up splash screen.
Support for 0-10 V & 4-20mA oil pressure senders.
Provides support for a wide range of sensors and parameters.
Can be configured for use as a remote display module
Single product can be used for dual functionality.
SPECIFICATION
DC SUPPLY
CONTINUOUS VOLTAGE RATING8 V to 35 V Continuous
5 V for up to 1 minute
CRANKING DROPOUTS
Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.
MAXIMUM OPERATING CURRENT
510 mA at 12 V, 240 mA at 24 V
MAXIMUM STANDBY CURRENT
330 mA at 12 V, 160 mA at 24 V
CHARGE FAIL/EXCITATION RANGE
0 V to 35 V
GENERATOR & MAINS (UTILITY)
VOLTAGE RANGE15 V to 415 V AC (Ph to N)
25 V to 719 V AC (Ph to Ph)
FREQUENCY RANGE
3.5 Hz to 75 Hz
MAGNETIC PICK UP
VOLTAGE RANGE+/- 0.5 V to 70 V
FREQUENCY RANGE
10,000 Hz (max)
ENVIRONMENTAL TESTING STANDARDS
ELECTRO-MAGNETIC COMPATIBILITY
BS EN 61000-6-2
EMC Generic Immunity Standard for the Industrial Environment.
BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment.
ELECTRICAL SAFETY
BS EN 60950
Safety of Information Technology Equipment, including Electrical Business Equipment.
TEMPERATURE
BS EN 60068-2-1
Ab/Ae Cold Test -30°C.
BS EN 60068-2-2
Bb/Be Dry Heat +70°C.
VIBRATION
BS EN 60068-2-6
Ten sweeps in each of three major axes.
5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn.
HUMIDITY
BS EN 60068-2-30
Db Damp Heat Cyclic 20/55° C @ 95% RH 48 Hours.
BS EN 60068-2-78
Cab Damp Heat Static 40° C @ 93% RH 48 Hours.
SHOCK
BS EN 60068-2-27
Three shocks in each of three major axes 15 gn in 11 ms.
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES
BS EN 60529
IP65 - Front of module when installed into the control panel with the optional sealing gasket.
Other Controllers
Generator controller brands
Deep sea , Comap ,and Smartgen
DEEP SEA Genset Generator Auto Start Control Modules:
DSE6110, DSE6120, DSE7210, DSE7220, DSE7310, DSE7320 ,DSE7010., DSE7020, DSE704, DSE710, DSE720, DSE5110, DSE5220, DSE6110, DSE6120, DSE7210, DSE7220, DSE7310, DSE7320 and Others
Smartgen Genset Generator Auto Start Control Modules
HGM6010, HGM6020, HGM6110, HGM6120, HGM6320, HGM7210, HGM7220, HGM8110, HGM8120, HGM9310, HGM9320, HGM9610,HGM9620
Standard Packing: Carton
Delivery:
Approximately 7-10 days upon order confirmation
FAQ:
1) Q:Why your company ?
A: MAMO Power is a professional manufacturer , we have our own product lines to control the quality and goods are following international standards, IE, CE, ISO9001 etc.
2) Q: Your address ?
A: Locates in Jin'an District, Fuzhou, Fujian Province
3) Q: What's the ATS guarantee?
A: 2 years warranty. If customer's problem, then customer burden. If our problem, then we send new goods to customer to replace asap.
4) Q: What's about MOQ? Delivery time ?
A: 1pcs for ATS. Normally less than 1000A ATS with stock, quick support.
6) Q: What's the payment term?
A: Normally 100% T/T in advanced payment. If big order then about 50% advanced payment, balance before shipment and also can accept LC
7) Q: Which port of loading ?
A: Fuzhou Port
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......