Products

Vissonci Fashion 4 Input Feedback Suppressor with Phantom Power for Mic Input

China Vissonci Fashion 4 Input Feedback Suppressor with Phantom Power for Mic Input, Find details about China Suppressor, Feedback Suppressor from Vissonci Fashion 4 Input Feedback Suppressor with Phantom Power for Mic Input

Model NO.
VIS-FS100
Power Supply Voltage
230VAC / 115VAC, ± 10%
Maximum Starting Power
1.5A (230VAC) / 3A (115VAC)
Frequency Response
125Hz ~ 15kHz
Noise Ratio (S / N)
> 90dB
Gain Adjustment Range
Mute ~ 20dB
Signal Delay
<11 Ms
Trademark
VISSONIC
Transport Package
Carton Box
Specification
483L*260W*43.6H
Origin
China
HS Code
8543709990
Model NO.
VIS-FS100
Power Supply Voltage
230VAC / 115VAC, ± 10%
Maximum Starting Power
1.5A (230VAC) / 3A (115VAC)
Frequency Response
125Hz ~ 15kHz
Noise Ratio (S / N)
> 90dB
Gain Adjustment Range
Mute ~ 20dB
Signal Delay
<11 Ms
Trademark
VISSONIC
Transport Package
Carton Box
Specification
483L*260W*43.6H
Origin
China
HS Code
8543709990
Five-channel Fully Automatic High-speed Howling Suppression Algorithm Feedback Suppressor

Vissonci Fashion 4 Input Feedback Suppressor with Phantom Power for Mic Input
Overview

VIS-FS100-A feedback suppressor uses a powerful signal processor and a fully automatic adaptive algorithm, which is easy to use. In addition to supporting 4-line / microphone input, it is also equipped with an AUDIOLINK digital audio cascade interface and supports 5 channel automatic mixer.

Features
  1. Fully automatic high-speed howling suppression algorithm, no need to debug, ready to use
  2. Eliminate feedback
  3. Automatically adapt to the acoustic environment
  4. Up to 12DB additional gain to effectively prevent feedback
  5. Equalized line or microphone input to provide phantom power
  6. With AUDIOLINK digital cascade input and output interface
  7. Four microphone inputs and digital interface AUDIOLINK inputs with automatic mixer
 
Function
  1. The adaptive filter can switch between "Fast" mode and "Precise" mode. Fast mode is suitable for situations where the microphone position changes frequently. Adaptive filters converge at a slower rate, suppressing more reverberation components. Depending on the acoustic environment and the selected operating mode, an additional gain of up to 12DB can be obtained before acoustic feedback occurs.
  2. The feedback suppressor also has a built-in automatic mixer to achieve four microphone inputs. In many cases, such as on a podium, pulpit, or conference table, the use of the above two microphones can better capture the voice of a moving speaker, which often increases the risk of acoustic feedback. In view of this problem, the automatic mixer in the feedback suppressor will automatically reduce the gain of the microphone with a weak signal input, while increasing the gain of another microphone with a strong signal input. In this way, it can track the speaker on the move, producing the best sound clarity. At the same time, since the total amount of gain remains constant, a maximum volume is maintained without generating acoustic feedback.
  3. When the feedback suppressor is configured with two AUDIOLINK cascade interfaces, it is connected to the CLEACON series conference controller through the AUDIOLINK interface, and the conference controller outputs audio to the feedback suppressor for mixing output, and can be cascaded to the next feedback suppressor or Other devices with AUDIOLINK interface.
  4. Even if the feedback suppressor is switched to the "bypass" mode, the automatic mixer function still works.
    Vissonci Fashion 4 Input Feedback Suppressor with Phantom Power for Mic Input
    Controls and indicators

    - Switch
    - Bypass button with yellow LED
    - Activate ACTIVE button with yellow LED
    - Calibration button. Start quick calibration cycle
    - 4-channel microphone / line input status indicator
    - Overload (at 0DBFS), red LED
    - Enable Auto Mix, yellow LED
    - Calibration, yellow LED

    Specification
    Electrical characteristics
    Power supply voltage .......230VAC / 115VAC, ± 10%, 50 / 60Hz
    15W
    Maximum starting power .......1.5A (230VAC) / 3A (115VAC)
    Sampling rate....... 32KHZ
    Frequency response.......125HZ-15KHZ
    <1% at 1KHZ distortion
    Gain .......0dB line in, 12dB / 0dB / -12dB (Low / Med / High) microphone input
    Gain adjustment range....... Mute ~ 20dB
    S / N ratio.......> 90DB
    Signal delay .......<11 ms
    Decoupler frequency variation....... up to 5HZ shielding noise

    Line / microphone input
    Maximum input level....... 6dBv
    Output resistance....... <100 ohm
    CMRR.......> 25DB (50HZ-20KHZ)
    24V phantom power (microphone only, switchable)
    10dBv maximum output level

    conventional
    Relative temperature <95%
    Weight 3 kg
    Operating temperature range from 10 ° C to 55 ° C
    Storage temperature range 40 ° C to 70 ° C
    Relative humidity <95%

    Item Model for Order
    VIS-FS100-A ........ Five-channel Fully Automatic Feedback Suppressor
    VIS-FS100 ........ Four-channel full-automatic feedback suppressor


    Application
    Vissonci Fashion 4 Input Feedback Suppressor with Phantom Power for Mic Input
    Vissonci Fashion 4 Input Feedback Suppressor with Phantom Power for Mic Input
    Vissonci Fashion 4 Input Feedback Suppressor with Phantom Power for Mic Input
    Vissonci Fashion 4 Input Feedback Suppressor with Phantom Power for Mic Input
    Vissonci Fashion 4 Input Feedback Suppressor with Phantom Power for Mic Input
    Vissonci Fashion 4 Input Feedback Suppressor with Phantom Power for Mic Input
     

    You Might Also Like