China Lgcm Integral Hydraulic Mini Excavator Tractor Cheap Loader Backhoe, Find details about China Backhoe, Wheel Loader from Lgcm Integral Hydraulic Mini Excavator Tractor Cheap Loader Backhoe
The LGB88 is a new multi-function engineering machine which gathering the loading and excavating in the integral whole machine.
Having adopted four wheel drive, hydraulic torque conberter, hydraulic streering system, hydrulic.
It is extensively used in the roadmaintenance, farml and developments, getting clay for making brckiln, piping builds, the cable builds, park virescence and the excavating of the road opens to dig, broking up etc.
1. The Yuchai engine
Low noise, low exhaust gas, low west, green environmental protection, driving motive, good reliability. The spirit valve control take type brake system and parking brake system move two unite as one, when there is trouble in the gas brake system, it can make intime brake automatically,so it is more safety.
2. Humanization designs
The hand handle layout reasonable, manipulating is portable;steer device, gauge dish and the chair all can be adjusted in up-down and front-back directions according to your sense, so it is comfortable. The back wheel bridge can swing up and down round the cancer, it make wheels has well cling, so the machine has good span and cross capability.
3. Optimized load work device
Reasonable joint layout,dependable position limit function. Lavelling bucket automati-cally in unload position, lacenning labor intensity,and the work range is larger, workfore is more study and steady, the work efficiency is higher.
Optional parts:
4 in 1 bucket/ hammers/ Snow plough/ Augers
LGB88 BACKHOE SPECIFICATIONS
The Main Performance Parameter of Backhoe Loader LGB88 | ||||
Overall Operating Weight | 8200KG | Final Reducer | Single Stage Final Reducer | |
Transport Dimension | Rated Loader of Axle | 4/18.5t | ||
L*W*H | 6230×2365×3752 | Transmission System | ||
Wheel base | 2200mm | Torque Converter | ||
Min. Ground Clearance | 300mm | Model | YJ280 | |
Bucket Capacity | 1.0m3 | Type | Single-stage Three Elements | |
Breakout Force | 38KN | Max. Efficiency | 84.4% | |
Loading Lifting Capacity | 2500KG | Inlet Pressure | 0.4Mpa-0.55 Mpa | |
Bucket Dumping Height | 2650mm | Outlet Pressure | 1.2Mpa-1.5 Mpa | |
Bucket Dumping Distance | 1025mm | Cooling Method | Oil-cooling Pressure Circulation | |
Digging Depth | 52mm | Gearbox | ||
Backhoe Capacity | 0.3 m3 | Type | Fixed Shaft Power Transmission | |
Max. Digging Depth | 4085mm | Oil Pressure of Clutch | 1373Kpa-1569 Kpa | |
Swing Angle of Excavator Grab | 190o | Gears | Two Gears Ahead, Two Gears Astern | |
Max. Pulling Force | 39KN | Max.Speed | 22Km/h | |
Engine | Tyre | |||
Model | Dongfeng Cummins | Model | 4BTA3.9-C100 | |
Type | urbocharging four-stroke | Pressure of Front wheel | 0.22 Mpa | |
Cylinder-Inside Diameter*Stroke | 4-105 | Pressure of Back Wheel | 0.22 Mpa | |
Rated Power | 74KW | Brake System | ||
Rated Speed | 2400r/min | Service Brake | Air Over Oil Caliper Brake | |
Min. Fuel Consumption | 235g/kw.h | External Type | ||
Max.Torque | 310NM | Self-regulation | ||
Displacement | 4.3L | Self-balance | ||
Steering System | Emergency Brake | Operation Power Implementing brake | ||
Model of Steering Device | BZZ5-250 | Manual Operation Power Terminating Brake | ||
Steering Angle | ±36 o | Hydraulic System | ||
Min. turning radius | 6581mm | Digging Power of Excavator Grab | 46.5KN | |
Pressure of the system | 12Mpa | Digging Power of Dipper | 31KN | |
Axle | Bucket Lifting Time | 5.4S | ||
Manufacturer | Feicheng Axle Factory | Bucket Lowering Time | 3.1S | |
Main Transmission Type | Double Reduction | Bucket Discharge Time | 2.0S | |
Pump | Model | 2063 Double pump | ||
Manufacturer | Jinan Quancheng | Discharge | 80L/mi |
1.How long is your lead time?
15-20days after receiving the deposit
2.How is the warranty?
Our warranty time is 6 months from date of machine arriving at your destination port.
3.Do you have any machine in stock?
No, every machine is manufactured according to customer request. This ensures higher quality.
4.Could you do OEM?
Yes, OEM is acceptable. We could make the unique machine as per your specific configuration and requirements.
5.What is the advantage of LAIGONG?
All of our machines passed CE test, We strictly follow the CE standard to produce the loaders, and each of them is passed our rigorous inspection.
Our factory is passed ISO9000 and ISO4000 test.
6.What kind of service can we get from LAIGONG?
If there is any using problem, we can provide online or video guidance.
If there is any quality problem, we will provide solutions through your pictures or your description, or our local dealer could also service on-site.
Our service department has no holiday, always stand by for you and respond within 5 hours.
7.Why do you choose LAIGONG?
LAIGONG Equipment established in 2018, In the earlier period, we only designed and manufactured the chassis frames, since 2011, we have started to assemble the loaders, we had gained lot of experience during these 5 years and summarized that the frame's quality decide the loader's quality, so our products are more practical and more reliable.