Products

Milk Cooling Tank 1500 Liter U Shape

China Milk Cooling Tank 1500 Liter U Shape, Find details about China Open Top Milk Cooler, Horizontal Milk Cooling Tank from Milk Cooling Tank 1500 Liter U Shape

Model NO.
MCT-1.5TU
Cooling Tank Capacity
300L ~ 150, 000liter
Cooling Device
Copeland, Bitzer, Danfoss
Cooling Power
2HP ~ 24HP
Temperature Range
2~40 Degree C
Evaporator Type
Direct Expansion
Mixing Speed
25rpm
Mixing Mode
Manual and Automatic Control
Power Supply
220V 60Hz 3phase / 380V 50Hz 3phase
Thermal Insulation
50~80mm PU
Trademark
ranking
Transport Package
Wooden / Nylon
Specification
300~150, 000Liter
Origin
China
HS Code
8434200000
Model NO.
MCT-1.5TU
Cooling Tank Capacity
300L ~ 150, 000liter
Cooling Device
Copeland, Bitzer, Danfoss
Cooling Power
2HP ~ 24HP
Temperature Range
2~40 Degree C
Evaporator Type
Direct Expansion
Mixing Speed
25rpm
Mixing Mode
Manual and Automatic Control
Power Supply
220V 60Hz 3phase / 380V 50Hz 3phase
Thermal Insulation
50~80mm PU
Trademark
ranking
Transport Package
Wooden / Nylon
Specification
300~150, 000Liter
Origin
China
HS Code
8434200000
U shape milk cooler cooling milk tank 2000Liter (U shape milk cooling tank capacity should not above 3000Liter)
Technical Specification of Milk Chilling Tank 1000L / 2000L
milk cooling tank capacity can be customized. here below is the specification of our 1000Liter milk cooling tank.
Bulk Milk Cooler (1,500 litres):
ABasic Design Parameters
 ParametersStandard Value
IMilk storage (Rated) capacity1.500 litres (Customized)
iiMaximum cooling temperature rangeMilk can be cooled from 350C to 2 or 40C
iiiMaximum cooling timeTotal capacity milk can be cool down from 350C to
30C to 40C within 2 to 3 hours.
ivConnected power380V -3phase / 220V 3phase
vAmbient temperature considered when design43degree C
Milk Cooling Tank 1500 Liter U Shape
 
BTank and Evaporator
The bulk milk cooling unit is designed to cool raw milk at milk farm and dairy processing plant to conserve the quality of milk. It is a hygienic container built to sanitary standard. Tank inner, outer, bottom dimpled jacket are all made of SS 304 material and welded with TIG process. The inner shell & all other milk contact surfaces are polished up to minimum 150 grid finish (standard). (200 and 240 grid finish optional) The evaporator will be dimpled pressed plate Jacket put at the bottom plate of the inner tank. Optimum design with large evaporation surface area for rapid and problem-free cooling at all volumes of milk. All connecting pipes terminating outside the tank are of SS construction. 
Horizontal Milk Cooling Tank should have a top manhole cover with locking arrangement for inspection. Milk inlet and outlet pipe use tri-clover clamp. 3600 spray ball for easy cleaning. 
Agitator designed to be automatic control and manual control. 
IManufacture Wenzhou RANKING
iiRated capacity 1,500Liter
iiiBrand nameRANKING
ivModelMCT-1.5
vConstruction materialAISI 304
viShape & OrientationHorizontal Cylindrical Close type with man way
viiNumber of Agitator01
viiiRPM of agitator25rpm ~30rpm
ixPosition & shape of agitator bladeThe position and shape of agitator bladed such that
even small quantities of milk should be gentle stirred
without danger of freezing
xCIP facilityCleaning & rinsing by self-rotating spray ball at
the top portion of the tank with the help of existing balance tank
& stainless steel centrifugal pump.
xiManhole and ladderFor milk cooling tanks with less than 3T capacity, ladder is optional. For 5T and 10,000litres milk cooling tanks manhole and  stainless steel ladder are standard.
xiiWall Thickness of inner shell2mm 
xiiiWall Thickness of outer shell0.9mm
xivThermal insulation 
 
  •  
Injected polyurethane foam (PUF)
 
  • Thickness 
50mm (Minimum)
 
  • Density 
40kg/m3
 
  • Efficiency
The insulation efficiency is such that the rise of milk temperature initially at 4.C don't exceed 1"C during 12
hours with the rated volume of milk not being stirred and
room temperature 25 .C as per requirement of ISO 5708.
xvFacility to measure the milk volumeGlass level meter
xviTank legsStainless steel legs with adjustable foot pad
xviiMilk outletThrough specially designed lockable 51mm butterfly valve and terminating in clamp end connection 
xviiiOverall dimension of tankPls contact with Mr. Cheng at
xixweight 
Milk Cooling Tank 1500 Liter U Shape
CRefrigeration unit
 The refrigeration system is designed with adequate capacity to chiIl the milk as per basic design parameter with multiple condensing units. Each condensing unit consists of the compressor, condenser, receiver, dryer, expansion valve, high-pressure cut out, low-pressure cut out, solenoid valve, sight glass, oil separator and other controls suitable for smooth operation of the plant. We offer related refrigerant pipes, fittings for interconnection of all refrigeration components. All refrigerant pipes will be properly clamped on fixed support and
sponge insulation for protection. There should have shut off valve both sides of compressor, receiver & dryer.
IRefrigeration systemDirect expansion 
iiCompressor typeHermetically sealed reciprocating 
iiiBrand name of compressorCopeland 
ivModel MCT-1.5
vNumber of compressor 1 Nos.
viOrigin USA
viiCooling capacity of Compressor at 0'C evaporating & 50"C condensing temp. (Kcal/hr.)6000
viiiCondensers type Air cooled, screen protected, included draft type, 100% copper tube
ixReceiver size and capacity2~5litres
xThermostatic Expansion valveAny reputed brand
xiType of refrigerant Environment friendly

Milk Cooling Tank 1500 Liter U Shape
DElectric control panel
The control panel will be dust and vermin proof design in stainless steel enclosure suitable for mounting on the wall/cooling tank. The panel will pre wired to terminal connections and will comprise of the following:
IIn coming MCB to receive power from main power line.
iiVoltmeter and ammeter with selector switch for monitor the main supply voltage and currant of every phase.
(for old design only)
iiiLine voltage controller to protect the compressor against voltage supply fluctuation.
ivPhase failure prevention.
vSequential controller with timer delay arrangement to avoid sugar on power supply.
viIndividual MCB fir every motor.
viiSelector switch for selecting operation of agitators on auto or manual arrangement 
viiiDigital temp. controller and indicator with display (0~100 0C)
ixElectrical wiring of power and control line between Electrical Control Panel to compressors, condenser fans, pump and other equipment will be done by supplier's engineer including
supply of adequate size electrical power and control cables.
Milk Cooling Tank 1500 Liter U Shape

2. Balance tank (optional)
 Milk Revering Tank should be made of stainless steel AlSl 304 grade with adjustable legs, can tipping bar, milk outlet with butterfly valve (38mm) and inline stainless steel (AlSl 304) filter unit.
capacity : 200 litres (min)
 Milk Cooling Tank 1500 Liter U Shape
3. Milk pump (optional)
 To pump raw milk from the balance tank to the cooling tank and chilled milk from the cooling tank to the milk carrying tanker as well as help for CIP of whole plant. Pumps housing and motor will be separated by a self-adjusting rotary seal. Pump casing, impeller and shaft seal will be made of acid & caustic proof stainless steel. It will be included a DOL starter for start and stop of the pump. Each pump should have 3 sets of shaft seal as spare.
Capacity: 3,000L/H
Milk Cooling Tank 1500 Liter U Shape

Milk cooling tank bulk milk cooler On line service 
If you would like to talk to us directly, please call   and ask to speak with Tonny Cheng.
We are ready to answer your call and questions anytime. 

Offer bulk milk cooling tank 200~1000Liter (U shape milk cooler, open top milk cooling tank), bulk milk cooler and milk storage equipment

You Might Also Like