Epoxy powder coating is a series of epoxy based powder coating designed to give optimum mechanical properties and exceptional protective qualities on components and fabrications where long term exposure to ultra violet light or exterior weathering is not anticipated
Typical applications are on lab furniture, water/well pumps, certain engine components, children's' toys, certain electrical components.
Application Areas:Water Pipes, oil pipes under earth
Reinforced rebars
Electrically insulating parts
CURING CONDITIONS180 °C ~ 200 °C (work piece temperature), 10-15 minutes
AVERAGE COVERAGE8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)
Gloss&Texture&ColorSupper Matt(<10%), Matt(<30%)
Usually smooth
RAL color, Pantone colorsfull color range is available
PHYSICAL PROPERTIESSpecific gravity :1.2 ~ 1.8g/cm3 up to colors
Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)
Level of liquidity:24 ~ 27 mm
GENERAL TYPESPolyester powder coating
Epoxy Polyester Powder coating
Acrylic Powder Coating
Polyurethane powder coating
PACKINGOutside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.
STORAGE AND TRANSPORTStored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.
HEALTH AND SAFETYCoating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating