1. Main technical parameter for generator setGenset Model: | BCS400 |
Prime Power: | 360 KW /450KVA |
Standby Power: | 400 KW / 500KVA |
Frequency/Speed: | 50Hz/1500rpm |
Rated Voltage: | 400V |
Power Factor: | 0.8 |
Phase: | three-phases, four-wires |
Fuel consumption (100% load): | 97 L/h |
Engine: | Cummins |
Alternator: | Stamford |
Controller: | DeepSea |
Dimensions (LxWxH): | 3600×1550×1900 mm |
Net Weight: | 4650 kgs |
2.Features and technical parameter of Cummins engineA:Advanced design and excellent manufacturing
B: HOLSET waste gate valve: With better dynamic performance
C:Four stroke turbocharged engine, turbocharged and turbocharger intercooling technology
D:Unique Cummins PT fuel system, high-efficient fuel supply system and inlet system
E:Four valves per cylinder, direct injection, sufficient combustion, low pollutant emissions
F:Low fault rate and maintenance cost, less maintenance hoursModel no.: | KTA19-G3 |
Prime/standby power: | 403KW/448KW |
Rated Voltage: | 400V |
Frequency/Speed: | 50Hz/1500rpm |
Cylinders no. & Type: | 6 cylinders in line, 4-cycle |
Aspiration: | Turbocharging and Water to Air intercooling |
Bore × Stroke: | 159×159mm |
Displacement: | 18.9 L |
Compression ratio: | 13.9:1 |
Max. back pressure | 10 kPa |
Coolant capacity--engine only | 30 L |
--with HX 1134 Heat Exchanger. | 66 L |
Thermostat adjusting temperature (range) | 82-93ºC |
Oil pressure---Low idle speed | 138 kPa |
---Governed Speed | 345-483 kPa |
Fuel injection pump model | Direct injection Cummins PT |
Starter | 24V |
Battery charging system | 35A |
Dimensions (LxWxH): | 2142 × 1067 × 1733.5 mm |
Weight | 1855 kg |
3.Features and technical parameter of Stamford Alternator
A:Meet word-leading alternator standard requirement
B:Self-excited control, provide continuous short-circuit current capacity
C:H insulation grade can meet the requirements at hostile environment
D:2/3 winding pitch can restrain overmuch neutral current
E:12 stator leading-out terminal can be reconnected
F:Single bearing structure, Easy installation and maintenance, Standard protection class IP22Model no.: | HCI 544C |
Origin: | Wuxi, China |
Prime power: | 400KW/500KVA |
Rated Voltage: | 400V |
Frequency/Speed: | 50Hz/1500rpm |
Power Factor: | 0.8 |
Efficiency: | 93.8% |
Design: | Brushless single bearing, revolving field |
Regulator: | AVR self-regulation |
Stator: | 2/3 winding pitch |
Rotor: | Single bearing , flexible disc |
Exciter Type: | Brushless excitation |
Windings: | 100% copper |
Voltage regulation: | ±1% |
Overspeed: | 2250min-1 |
Indication of protection: | IP23 |
Insulation class | H |
Total Harmonic Distortion: | NO LOAD < 1.5% NON-DISTORTING BALANCED LINEAR LOAD < 5.0% |
Telephone Influence Factor(TIF): | <50 |
Telephone Harmonic Factor(THF): | <2% |
Dimensions (LxWxH): | 1292 x 700 x 971 mm |
Weight | 1263 kg |
4.Features for Deep Sea control panel- Control with AMF module
- Fuel usage monitor and low-level alarms
- Emergency stop push button
- Fully PC or front panel configurable
- Custom graphical icon interface display
- Manual/automatic load transfer
- Automatic shutdown on fault condition
- Remote communications (RS232 & RS485)
- Provides engine alarms and status information and alarm indication by 1 LED & LCD;
- Can be used with ATS or may allow up 1 to 32 generators to load share.
- Provides access to historical alarms and operational status
5.Standard configuration for the generator set- Diesel generator
- Synchronization brushless alternator
- Deepsea controller
- Drive fan for engine and 40ºC heat radiating water tank.
- Moulded case circuit breaker
- Battery and battery cable
- Floating charger
- Base frame with shock absorber
- Daily fuel tank
- Exhaust elbow, exhaust bellows, exhaust muffler
- Fuel filter, oil filter, air filter
- Tool kits
- Plastic membrane packing
6.Optional accessories- Jacket pre-heater
- Oil-water separator
- Oil pre-heater
- Spit-type daily fuel tank
- Weather and Sound-proof container
- Trailer
7.Warranty:Guarantee for one year or 1000 hours (according to whichever reach first)
From ex-factory date. During the guarantee period, we will provide the free
easy-damaged spare parts for problems caused by our quality of production or raw materials,
except the damage caused by customer's incorrect manmade operation.
After expiration, our company will provides cost spare parts maintenance for gen-set.8.Our Service:1). Pre-sales promise-Professional engineers will give reasonable suggestions about selection , room design to all the technical solutions
- Provide newest products, supply and marketing information
2). Selling promise
- Provide the technical support for the onsite installation gudiance and test before shipping
- Genset installation, room noise reduction and dust pollution ect.
3). After-sales promise-Training of operation and maintenance personnel
-Onsite repaire
-Spare parts supply9.Company profile:Our company is a professional manufacture of gas generator set, all our products are of good quality. Binshi power can produce various gas generator sets, such as natural gas gensets, biogas gensets, coal-gas gensets and LPG gensets. It blongs to new green environmental protection power to substitute those gensets powered by gasoline or diesel in the near future. Natural gas or other flammable gas can be esed well as fuel, which may be turned waste to treasure. Due to the advantage of convenient and safe operation, cost-effectiveness, low-emission pollution, and suitable for CHP, It will have a great prospect and application.Welcome clients from all the world come to visit and give us guidance in our factory Factory viewPackage typeClassic project: