Products

200mm Diameter Stainless Steel Standard Lab Test Sieve Shaker

China 200mm Diameter Stainless Steel Standard Lab Test Sieve Shaker, Find details about China Sieve Shaker, Test Sieve Shaker from 200mm Diameter Stainless Steel Standard Lab Test Sieve Shaker

Model NO.
HY-200
Loading Method
Dynamic Load
Display
Digital
Control
Manual Control
Weight
0-100Kg
Power Source
AC220V
Oil Cylinder Position
Under
Product Name
Test Sieve Shaker
Port
Shanghai, Qingdao
Layer
Upto 8 Layers
Voltage
220V, 110V, 50 or 60Hz
MOQ
1 Set
Trademark
Hengyu
Transport Package
Wooden Case
Specification
360*300*736mm
Origin
Xinxiang, China
HS Code
84741000
Model NO.
HY-200
Loading Method
Dynamic Load
Display
Digital
Control
Manual Control
Weight
0-100Kg
Power Source
AC220V
Oil Cylinder Position
Under
Product Name
Test Sieve Shaker
Port
Shanghai, Qingdao
Layer
Upto 8 Layers
Voltage
220V, 110V, 50 or 60Hz
MOQ
1 Set
Trademark
Hengyu
Transport Package
Wooden Case
Specification
360*300*736mm
Origin
Xinxiang, China
HS Code
84741000
200mm diameter stainless steel standard lab test sieve shaker 

Lab sample particle grading screener is recommended for general laboratory use and for the fine sieving of particles size.

Technical Parameters
NumberNameUnitData
1layerslayer1-8
2diametermm200
3granularitymm0.038-3
4noisedB50
5feed capacity(once)g200
6amplitudemm5
7voltagev220
8speedr/min1400
9powerKW0.12
10overall dimensionmm360*300*736
11weightKg37

200mm Diameter Stainless Steel Standard Lab Test Sieve Shaker
200mm Diameter Stainless Steel Standard Lab Test Sieve Shaker

Please note that:
a. Turn off power supply when the machine is not in use for an extended period of time.
b. Clean the sieves after operation, so they will be ready for use next time.
c. Do not splash water on the machine to avoid current leakage.
d. Turn the machine off immediately in the event of unusual noises and inspect for blockage or other irregularities.
e. Always ensure the lock nut is securely tightened before operation.

200mm Diameter Stainless Steel Standard Lab Test Sieve Shaker

Does your sieve testing process sound like this?
1. You pour the sample into the top sieve, clamp the stack and turn on the shaker.
2. The shaker is finish
3. You clean each sieve and weigh the results.
4. Now you divide the weight of the sample retained in each sieve by the total weight to get % retained.
5. This process can take 10-15 minutes for a stack of 9 sieves.    

If you need one set of Stainless Steel Lab Grain Test Sieve, please let's know the following requirements:
1. How many sieves you need at once
2. The mesh size of each sieves
3. Please suggest the voltage in your plant

You Might Also Like