Products

Tealth M4/B2 LED Inner Water Slow Speed Kit Handpiece

China Tealth M4/B2 LED Inner Water Slow Speed Kit Handpiece, Find details about China Medical Equipment, Medical Supply from Tealth M4/B2 LED Inner Water Slow Speed Kit Handpiece

Model NO.
1020L-M4 /B2
Application
Adult, Child
Loading Way
Gland Type
Head Diameter
Middle Head
Exhaust Way
Internal Exhaust
Number of Holes
Four Holes
Connection
Without Quick Connector
Rotating Speed
Low-Speed Handpiece
Noise
Less Than 70dB
Trademark
TEALTH
Transport Package
Plastic Box
Specification
Aluminum, stainless steel
Origin
China
HS Code
90184100
Model NO.
1020L-M4 /B2
Application
Adult, Child
Loading Way
Gland Type
Head Diameter
Middle Head
Exhaust Way
Internal Exhaust
Number of Holes
Four Holes
Connection
Without Quick Connector
Rotating Speed
Low-Speed Handpiece
Noise
Less Than 70dB
Trademark
TEALTH
Transport Package
Plastic Box
Specification
Aluminum, stainless steel
Origin
China
HS Code
90184100
Tealth M4/B2 LED Inner Water Slow Speed Kit Handpiece

1020L-M4 LED inter1020L-Mnal low speed set
Model:1020L-M4

Tealth M4/B2 LED Inner Water Slow Speed Kit Handpiece
Features:
1. Including 1pcs of 4 holes air-motor, 1pcs of contra-angle with LED light,1pcs of straight-handpiece
2. Internal Irrigation System ,perfect cooling, good helper for dentist
3. LED Low Speed Kit, E-generator, self-illuminated
4. Japanse bearings, long service life, more durable
5. Push button chuck, there are FG bur head or CA bur head(Φ1.60mm/Φ2.35mm) for individual choice
6. The LED bulb could be replaced, easy to operation 
7.4 holes connector

Tealth M4/B2 LED Inner Water Slow Speed Kit Handpiece

Tealth M4/B2 LED Inner Water Slow Speed Kit Handpiece


Instruction:
After each treatment,Sterilizing handpiece in autoclave according to the following steps:
1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.
3.Place into autoclaving pouch and mark.
4.Autoclave the handpiece for 12 min. at 135ºC.
5.For E-generator handpiece, we do not suggest that use ultrasonic to clean the handpiece

 

You Might Also Like