Products

Special Offer! ! 200 Mesh Xanthan for Oil Drilling and Industry Use

China Special Offer! ! 200 Mesh Xanthan for Oil Drilling and Industry Use, Find details about China Xanthan Gum, Gum Xanthan from Special Offer! ! 200 Mesh Xanthan for Oil Drilling and Industry Use

Model NO.
DEO T
Raw Material
Corn Starch
Mesh
40/80/200 Mesh
Grade
Oil Drilling Grade
Certificates
SGS, CIQ
Trademark
Doeast
Transport Package
25kg Craft Paper Bag
Specification
100%
Origin
China
HS Code
3913900
Model NO.
DEO T
Raw Material
Corn Starch
Mesh
40/80/200 Mesh
Grade
Oil Drilling Grade
Certificates
SGS, CIQ
Trademark
Doeast
Transport Package
25kg Craft Paper Bag
Specification
100%
Origin
China
HS Code
3913900
DEVIS is specially produced as mud additive for oil drilling and expoitation. Being an environment friendly and high efficiency mud additive, DEVIS has an excellent tolerance to the changes of temperature, acid, alkaline and salt. Meanwhile, it can extremely increase the products penetrating ability and suspending performance to small solid materials, and reduce the pressure loss during drilling. This xanthan gum cannot only fasten the well bore, but decrease the damage to oil formation. It can also greatly raise the efficiency of drilling, workover and completion. As a biotype oil driver, DEVIS can improve oil extraction rate and utilization factor of natural resources. The more important point is that it can furthest protect natural environment.
 
SPECIFICATIONS
 
AnalysisStandard
Physical propertyWhite-like or Light-yellow Free-flowing powder
Particle Size (mesh)200
Viscosity(1% kcl Solution) (cp)≥1200
Shearing Ratio≥6.5
Loss on Drying (%)≤14
PH Value6.0-8.5
Density (kg/l)≥0.3
                                                    
PACKAGE, STORAGE & CAUTION
  1. Packed in paper bag with PE liner inside and 25kg net each.
  2. Stored in the original drums or bags under the conditions of dry and below 25oC, a shelf life of at least 15 months will be achieved.
  3. To be added slowly through the hopper at maximum shear to avoid lumping and to minimize waste, the appropriate adding ratio should be 0.3-1.2%.
SAFETY
Avoid contacting with eyes, skin and clothing. Otherwise, wash with a flush of water. Refer to Material Safety Data Sheet (MSDS) for complete handling and hazard data.

Special Offer! ! 200 Mesh Xanthan for Oil Drilling and Industry Use

You Might Also Like