F1126P-24-250W is a unmanaged PoE switch independently designed by IP-COM. Compliant with IEEE 802.3af and IEEE 802.3at standards, it can identify PoE-powered devices intelligently. With a maximum PoE power output of 230 W, and 30 W for a single port, it can supply power when transmitting data with APs, IP cameras, and IP phones. The switch supports 4 working modes, including standard, priority, extend and VLAN modes, is an ideal choice for SMBs, hotels, schools, factories with video surveillance and wireless networking requirements.



Function Description of DIP Switch
Standard Mode:
Default mode of the switch. In this mode, it works as an unmanaged switch; all ports can communicate with each other separately.

Port Priority Mode:
In this mode, port G1 and G2/SFP2 serve as uplink ports, ports 1 - 8 serve as high priority port. All ports can communicate with each other separately.

Extend Mode:
In this mode, data rate of ports 17 - 24 reduces to 10 Mbps, the maximum transmission distance can be 250 meters, and all ports can communicate with each other.

VLAN Mode:
In this mode, ports 1 - 24 of the switch can communicate with port G1, G2/SFP2 separately, but cannot communicate with each other. You can enable this mode to reduce broadcast storm and isolate DHCP broadcast."



Features:

• 24 * 10/100 Mbps Base-TX RJ45 ports for data transmission and power supply, 2 * 10/100/1000 Mbps Base-T RJ45 ports for data transmission, 1 * 1000 Mbps Base-X combo SFP slot
• 16 K MAC address table and MAC address auto-learning.
• IEEE 802.3x-compliant full-duplex flow control and half-duplex backpressure flow control.
• 8.8 Gbps backplane bandwidth.
• Maximum power consumption of a single port: 30W; Maximum power consumption of the switch: 250W.
• 4 Mb cache size for smooth video surveillance.
• 4 modes: standard, priority, extend and VLAN.
• 19" 1U Rack-mount