CAT Caterpillar 215hp crawler bulldozer (D6T)
Contact:Annie Li / Sales Manager mobile No.:+86 138 17690558
EVANGEL INDUSTRIAL (SHANGHAI) CO., LTDEVANGEL INTERNATIONAL MACHINERY LTDADD: Suite 1326, Fortune Times Tower, No. 1438 North Shanxi Road, Shanghai, China
Tel: +86-21-62770109 Fax:+86-21-63168515
OVERVIEW
The new D6T dozer makes high efficiency dozing as easy as driving your pickup truck. A smooth-shifting, fully automatic four-speed Cat® transmission continuously optimizes the power train for the application. You save fuel and operator effort, without sacrificing durability, power or productivity. Work smarter too, with a full range of Cat Connect GRADE technology features to fit your job site needs.
ENGINE
Engine Model | Cat C9.3 ACERT™ |
Flywheel Power | 215.0 HP |
Displacement | 567.0 in³ |
Emissions | U.S. EPA Tier 4 Final |
Net Power - 2,200 rpm - ISO 9249/SAE J1349 | 215.0 HP |
Net Power - Maximum - ISO 9249/SAE J1349 at 1,200 rpm | 245.0 HP |
Note (1) | All non road Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. |
Note (2) | Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. |
Build Number | 19 |
SERVICE REFILL CAPACITIES
Fuel Tank | 97.2 gal (US) |
Cooling System | 12.2 gal (US) |
Engine Crankcase | 6.5 gal (US) |
Power Train | 39.1 gal (US) |
Final Drive - Each | 3.6 gal (US) |
Roller Frames - Each | 6.6 gal (US) |
Pivot Shaft Compartment | 1.3 gal (US) |
Hydraulic Tank | 16.5 gal (US) |
DEF Tank | 4.5 gal (US) |
WEIGHTS
Operating Weight | 47138.0 lb |
OPERATING WEIGHTS
LGP A | 53829.0 lb |
LGP S | 51385.0 lb |
XL A | 47846.0 lb |
XL SU | 47138.0 lb |
XL VPAT | 53042.0 lb |
XW A | 49797.0 lb |
XW SU | 48909.0 lb |
XW VPAT | 54045.0 lb |
LGP VPAT | 54526.0 lb |
Note | Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator. |
BLADES - CAPACITY
LGP A-Blade | 6.46 yd³ |
LGP S-Blade | 4.96 yd³ |
XL A - Blade | 5.17 yd³ |
XL SU - Blade | 7.26 yd³ |
XL VPAT - Blade | 6.07 yd³ |
XW A - Blade | 5.69 yd³ |
XW SU - Blade | 7.38 yd³ |
XW VPAT - Blade | 6.57 yd³ |
LGP VPAT - Blade | 6.57 yd³ |
BLADES - WIDTH
LGP A-Blade | 16.6 ft |
LGP S-Blade | 13.3 ft |
LGP VPAT - Blade | 13.7 ft |
XL A - Blade | 13.7 ft |
XL SU - Blade | 10.7 ft |
XL VPAT - Blade | 12.7 ft |
XW A - Blade | 14.8 ft |
XW SU - Blade | 11.7 ft |
XW VPAT - Blade | 13.7 ft |
DIMENSIONS - LGP
Ground Clearance | 16.0 in |
Ground Pressure (ISO 16754)(3) | 5.11 psi |
Length - Basic Tractor(2) | 14.5 ft |
Length - Track on Ground | 10.67 ft |
Machine Height - To Product Link Antenna(1) | 10.83 ft |
Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). |
Note (2) | (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. |
Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. |
Width - Tractor - Without Trunnions - Standard Track | 10.5 ft |
DIMENSIONS - LGP VPAT
Ground Clearance | 16.0 in |
Ground Pressure (ISO 16754)(3) | 6.28 psi |
Length - Basic Tractor(2) | 16.42 ft |
Length - Track on Ground | 10.67 ft |
Machine Height - To Product Link Antenna(1) | 10.83 ft |
Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). |
Note (2) | (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. |
Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. |
Width - Tractor - Without Trunnions - Standard Track | 10.33 ft |
DIMENSIONS - XL
Ground Clearance | 15.0 in |
Ground Pressure (ISO 16754)(3) | 8.66 psi |
Length - Basic Tractor(2) | 13.83 ft |
Length - Track on Ground | 9.25 ft |
Machine Height - To Product Link Antenna(1) | 10.67 ft |
Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). |
Note (2) | (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. |
Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. |
Width - Tractor - Without Trunnions - Standard Track | 8.0 ft |
DIMENSIONS - XL VPAT
Ground Clearance | 15.0 in |
Ground Pressure (ISO 16754)(3) | 9.78 psi |
Length - Basic Tractor(2) | 16.08 ft |
Length - Track on Ground | 9.25 ft |
Machine Height - To Product Link Antenna(1) | 10.67 ft |
Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). |
Note (2) | (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. |
Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. |
Width - Tractor - Without Trunnions - Standard Track | 8.92 ft |
DIMENSIONS - XW
Ground Clearance | 15.0 in |
Ground Pressure (ISO 16754)(3) | 6.64 psi |
Length - Basic Tractor(2) | 13.83 ft |
Length - Track on Ground | 9.25 ft |
Machine Height - To Product Link Antenna(1) | 10.67 ft |
Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). |
Note (2) | (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. |
Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. |
Width - Tractor - Without Trunnions - Standard Track | 9.17 ft |
DIMENSIONS - XW VPAT
Ground Clearance | 16.0 in |
Ground Pressure (ISO 16754)(3) | 6.92 psi |
Length - Basic Tractor(2) | 16.42 ft |
Length - Track on Ground | 10.67 ft |
Machine Height - To Product Link Antenna(1) | 10.83 ft |
Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). |
Note (2) | (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. |
Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. |
Width - Tractor - Without Trunnions - Standard Track | 9.83 ft |