China 120HP Agricutural Wheel Tractors, Find details about China Tractor, Wheel Tractor from 120HP Agricutural Wheel Tractors
Model HH1204 | |||
Type | 4x4 | ||
Engine | |||
Diesel model | CHINESE YTO Diesel Engine LR6B5-23 | ||
Type | Vertical, water-cooled, 4-stroke, direct injection, natural aspiration | ||
Engine power/speed | 88.3 kw & 2300r/min | ||
Cylinder | 6No.s | ||
Fuel tank capacity | 280L | ||
Weight | |||
Min. using mass | 4850kg(with cab) | ||
Front counterweight | Max.500kg | ||
Rear counterweight | Max.300kg | ||
Parameters | |||
Min. turning circle radius | 4.8+ 0.2m/ 5.5+0.2m (unilateral/ not unilateral brake) | ||
Rated traction force | 25.7KN | ||
Speed range(Forward/Reverse) | 1.58-33.69/2.41-34.67 km/h | ||
Gear shifting | 16F+8R (including creeping gears) | ||
Front & Rear Wheel Specification | |||
Front wheel spec. | 14.9-26 | ||
Rear wheel spec. | 16.9-38 | ||
Overall Dimensions | |||
Min. Ground clearance | 450mm (low-side from front driving axle) | ||
Wheelbase | 2688mm | ||
Front wheel tread | 1610 | ||
Rear wheel tread | 1620-2020mm (1660mm dispatching from factory) | ||
Overall dimension (L*W*H) | 4912*2425*3020mm Note: L includes front counterweight; H includes exhaust outlet. | ||
Transmission System | |||
Clutch Type | Dry-type, single disc, 13-inch dual-stage | ||
Gear shifting type | Mesh Sleeve shift | ||
Gear type | 4x(2+1)x2 | ||
Central transmission (front/rear) | Spiral bevel gear/Spiral bevel gear | ||
Differential Mechanism(front/rear) | Close-style, 2 bevel planet gears / Close-style, 4 bevel planet gears | ||
Differential Lock | Spline sleeve style | ||
Final transmission(front/rear) | Double universal joint planetary reduction/Single planetary gear | ||
Brake & Steering System | |||
Parking brake | Hand brake, mechanical multi-friction surface tightened oil bath, (with warning lights) | ||
Service brake | Hydrostatic, disc,oil bath, pedal brake | ||
Trailer brake control | Air-cut off brake | ||
Steering Type | Hydraulic front wheel steering | ||
Steering Device Type | Cycloid Rotary Valve | ||
Working System | |||
Type | Split-style | ||
Linkage category | Rear three-point linkage II | ||
Lifting force | >24KN (610mm behind the hanging point) | ||
Adjusting mode | Height adjustable, floating control | ||
PTO shaft type | Rear independent & Synchronous type | ||
PTO Speed | 540/1000 (6-spline) |