Products

Alumina Ceramics with Excellent Wear Resistance Are Made in China

Alumina Ceramics with Excellent Wear Resistance Are Made in China, Find details about China Alumina Ceramic, Hot Sale Concrete Pump Cutting Ring from Alumina Ceramics with Excellent Wear Resistance Are Made in China

Model NO.
150 * 50 * 12mm
Trademark
QIJING
Origin
Shandong
HS Code
6909120000
Model NO.
150 * 50 * 12mm
Trademark
QIJING
Origin
Shandong
HS Code
6909120000

   Qijing Trading Co., Ltd. main business: industrial ceramics, refractory materials, corundum wear-resistant ceramics, papermaking equipment and accessories, pulping equipment and accessories, papermaking dewatering equipment and accessories, pulping equipment and accessories, papermaking dewatering equipment and accessories, slag removal Equipment and accessories, wear-resistant pipes, mining equipment and accessories, alumina ceramic parts, thermocouple protection tubes, special-shaped fittings, pipe liner patch, pipe liner pipe, wear-resistant refractory ceramic parts, elbows, tees , Production and sales of electronic insulation materials.

      Customer first, quality first! Your satisfaction is our unremitting pursuit! As long as you request, we will complete the rest. Qi Jing Trading goes hand in hand with you to create brilliant!
 
 
Basic Info.
Thickness3~50mm or as Your RequestContent92% Alumina, 95% Alumina,T95,Zta
Density3.6, 3.65,3.7,3.83,4.10, 5.9 g/cm3Compressive StrengthMore Than 1050 MPa...
MOQ1tonSamplesFree Samples Can Be Provided
Delivery Time25-40 Days as Your RequestPaymentT/T or L/C
MarketIndia, Mumbai, Pakistan, Iran, etc.LabWe Have Our Own Lab
ServiceReply Within 1 HoursCapacity15000 Tons
PortQingdaoTrademarkUltraming
Transport PackageSafe Carton with PalletSpecification150*100*25 and so on.
OriginChina, Zibo CityHS Code6909120000

Alumina Ceramics with Excellent Wear Resistance Are Made in China


Specifications
Name:99% Alumina Ceramic Tube
Size:As your request
Content of Al2O3:≥ 99%
Density:3.9g/cm3 - 3.95g/cm3
Max. Length2000mm
Usage temperature:≤1800ºC
ColorIvory
 
Chemical component
Al2O3R2OFe2O3SiO2
≥99%≤0.2%≤0.1%≤0.2%
 
Technical parameters
Volume density:≥3.80 g/cm3
Apparent porosity:<1%
Bending resistance:>350 Mpa
Compressive strength:>12000 Mpa
Dielectric conatant ε (1MHz):2
Maximum usage temperature:1800C
 
Usage
1) Thermocouple protections;
2) Heat treatment furnace and toughened furnace;
3) Inner liner tube and heating tube in electric furnace;  
4) Some are used in furnaces.

Alumina Ceramics with Excellent Wear Resistance Are Made in China

  Transport and installation precautions:

Matters needing attention for transportation and installation of ceramic pipe
1. The ceramic composite pipe has high hardness and good toughness, but it should be put gently in the process of transportation and installation to avoid serious collision, especially to avoid direct contact with metal instruments or impact on the ceramic layer on the end surface.

2. The yunfeng bending pipe is installed with directivity. When the bending pipe is installed, the direction indicated by the arrow on the surface of the bending pipe should be consistent with the flow direction of the conveying medium.

3. When installing the pipe, the pipe should be aligned with the center line and level should be adjusted to make sure that both ends meet accurately.The displacement of both ends should be controlled within 1.0mm.

4. When the flexible pipe joint is used to connect and install the pipe, the inserted lengths of both ends of the flexible pipe joint shall be adjusted symmetrically.Since the thermal expansion coefficient of the composite pipe is about 1/3 of that of steel, the expansion clearance can be reduced by 3-5mm.

5. When using flange connection, the flange end shall be flush with the end of the composite pipe.

6. Due to the excellent welding performance of the composite pipe, the pipe connection can be conducted by welding. However, when welding, 45o-60o "V" type slope Angle is 2-4mm and gap is 0.8-1.2mm.



Package  



Alumina Ceramics with Excellent Wear Resistance Are Made in China





FAQ:
Q: Are you trading company or manufacturer ?
A: We are factory.

Q: How long is your delivery time?
A: Generally it is 15 days if the mould sizes are in stock. or it is 25 days if the mould sizes are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the stock sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?
A: For new customers, 100% T/T in advance. For  regular customers, 30% T/T in advance ,balance after received the B/L copy



Contact information:
 
 
 

 
 




 

You Might Also Like