Products

Sanhe Brand Voc Molecular Sieve as Catalyst for Waste Gas Treatment Replacement of Honeycombe Activated Carbon

China Sanhe Brand Voc Molecular Sieve as Catalyst for Waste Gas Treatment Replacement of Honeycombe Activated Carbon, Find details about China Zeolite Molecular Sieve, Voc Adsobent Material from Sanhe Brand Voc Molecular Sieve as Catalyst for Waste Gas Treatment Replacement of Honeycombe Activated Carbon

Aperture
Mesoporous, Microporous
Structure Material
Honeycomb Ceramic
Cell Density (In2)
100-400 Holes
Bulk Density (g/cm3)
0.45~0.50
Organic Adsorption Capacity
>2%
Purification Efficiency
90~95%
Customization
Yes
Transport Package
Pallet
Specification
100x100x50mm, 100x100x100mm, etc
Origin
China
HS Code
6909190000
Aperture
Mesoporous, Microporous
Structure Material
Honeycomb Ceramic
Cell Density (In2)
100-400 Holes
Bulk Density (g/cm3)
0.45~0.50
Organic Adsorption Capacity
>2%
Purification Efficiency
90~95%
Customization
Yes
Transport Package
Pallet
Specification
100x100x50mm, 100x100x100mm, etc
Origin
China
HS Code
6909190000
Introduction for Honeycomb Ceramic Molecular Sieve
At present, VOCs treatment mainly uses activated carbon. Since activated carbon cannot be analyzed at high temperature, it is replaced regularly. However, activated carbon adsorbed with organic matter is a dangerous chemical with high processing cost.This environmentally friendly adsorbent material is hydrophobic molecular sieve, which is different from ordinary molecular sieve in that it preferentially adsorbs water in gas. It has a highly selective adsorption capacity for organic matter, and can be resolved at high temperature, thus realizing continuous adsorption-regeneration.The adsorption material is made into a cellular structure by a special preparation process. The adsorption capacity of organic matter is more than 2%, which can be adsorbed and regenerated for a long time.

Principle
The mechanism of adsorption of VOCs organic compounds by dielectric honeycomb molecular sieve is to modify the molecular sieve so that the molecular sieve has a certain pore size to adsorb gas molecules, and add Fe3+, Fe2+, Mg2+, Mn2+, Sr2 and other metal treamentants to form the role of adsorption, catalysis and decomposition.The adsorption performance of zeolite molecular sieve adsorbent is combined with honeycomb structure. Through the test of users and our company, the adsorption performance in the fixed-bed reactor is good, reaching more than 80% within 10min.In terms of VOCs governance, it has special adsorption and catalytic effects, especially in terms of use, it is quite simple, and only needs to be installed in fixed bed reactor.After the adsorption capacity reaches saturation for a certain time, the regeneration can be repeated for many times.The adsorbed zeolite honeycomb ceramics have no pollution and can be crushed into ceramic materials, so the operation cost is very low.
 
Size(mm)100*100*100100*100*100
Channels No.(cm-2)1616
Wall Thickness (mm)0.60.6
L Tensile Strength(Mpa)0.80.9
Lateral Tensile Strength (Mpa)0.320.4
Density(g/cm3)0.500.44
Surface area (m2/g)>900>900
Benzene adsorption rate(%)>90%>90%
Soft degree(ºC)>900>900

Features
1. Adsorption Performance: Specific surface area 300-600m2/g, penetration adsorption capacity of typical VOCs is 3-5%, saturated adsorption capacity is 6-8%, for a variety of VOCs components with high adsorption capacity, especially suitable for the adsorption of medium and low concentration of VOCs, to ensure that the most stringent emission requirements are met;
2. Safety: The molecular sieve itself is composed of silicoaluminate and contains no combustible substances, so there is no risk of spontaneous combustion;
3. Hydrophobic: It can run stably in high humidity environment and maintain relatively high adsorption performance;
4. High-temperature resistance: For flammable, high boiling point and other components VOCs, can be desorption regeneration at 200-300ºC, the maximum temperature is not lower than 800ºC;
5. Lifetime: Up to 2-3 years long service life, high temperature desorption, complete desorption, stable adsorption capacity remains, easy regeneration, reusable, high strength product, gas, liquid erosion resistance;
6. Post-treatment for replacement: According to the industrial waste landfill treatment, also can be returned to the manufacturer for reuse.The cost is low;
7. Cost of use: Unit volume cost is higher than that of activated carbon, but total life cycle cost is significantly lower than that of activated carbon adsorbent, and it is safe and reliable.

Sanhe Brand Voc Molecular Sieve as Catalyst for Waste Gas Treatment Replacement of Honeycombe Activated Carbon
Sanhe Brand Voc Molecular Sieve as Catalyst for Waste Gas Treatment Replacement of Honeycombe Activated Carbon

About us
     Pingxiang Sanhe Ceramics Co., Ltd. lies in Pingxiang city, Jiangxi province, which belongs to one of the five ceramic production export bases in China. The company is a private technology share ceramics manufacturing enterprise founded in 2004. We specialize in honeycomb ceramic plates, honeycomb ceramics heat accumulators, honeycomb ceramic honeycomb substrates, ceramic foam filter and other producing energy conservation and environmental protection series ceramic products. 

     Sanhe Ceramics has successfully passed all kinds of certifications such as ISO9001 ISO14001, OHSAS18001 and so on, as well as established perfect quality control system and quality assessment system. Our company has been strictly controlled the whole manufactring system from production planning, processing control to maintenance of equipment as well as from raw material warehousing to quality test of finished products, We offer Stable and qualified products to customers from all over the world. Superiority, uniformity and environmental friendliness of its quality has gained great reputation among all customers. We obey the research and development design production idea of specialization, standardization, internationalization and technicalization, striving to make the products of the company more perfect with stronger customer base.

     Sanhe ceramics Co.,Ltd keeps the faith of "First impression is the last impression" and provides the best quality and comfortable service to all the buyers, No matter the deal is big or small, we are warmly welcome your coorperation. Any inquiries pls contact with us!


 

You Might Also Like