3D 355nm UV Laser Marking Machine for PC PP PE Marking

China 3D 355nm UV Laser Marking Machine for PC PP PE Marking, Find details about China UV Laser Marking Machine, Plastic Galss Marking Machine from 3D 355nm UV Laser Marking Machine for PC PP PE Marking

Basic Info.

Model NO.

MAN-uv-8w

Type

Optical Fiber Laser Marking Machine

Marking Method

Scanning Marking

Minimal Line Width

0.015mm

Applied Material

Metal and Non-Metal Material

Marking Power

Delivery Time

5-7 Working Days

Warranty

3 Years

Scanning Speed

7000mm/S

Certification

Ce FDA ISO

Trademark

CNMANLASER

Transport Package

Wooden Case

Specification

110*110mm/175*175mm

Origin

Shandong

HS Code

8456110090

Model NO.

MAN-uv-8w

Type

Optical Fiber Laser Marking Machine

Marking Method

Scanning Marking

Minimal Line Width

0.015mm

Applied Material

Metal and Non-Metal Material

Marking Power

Delivery Time

5-7 Working Days

Warranty

3 Years

Scanning Speed

7000mm/S

Certification

Ce FDA ISO

Trademark

CNMANLASER

Transport Package

Wooden Case

Specification

110*110mm/175*175mm

Origin

Shandong

HS Code

8456110090

Product Desciption

3D 355nm UV Laser Marking Machine for PC PP PE Marking

(Model:Man-uv8w)

Product Introduction:

The 3D dynamic uv laser marking machine is one of the series of laser marking machines, but it is developed with 355nm UV laser. The uv laser marking machine uses intracavity frequency doubling technology compared with infrared laser. The 355 UV focusing spot is very small and can greatly reduce the mechanical deformation of materials and have little influence on processing heat. Because the uv laser marking machine is mainly used for ultra-fine marking and engraving, it is especially suitable for high-speed division of food, medical packaging materials, micropores, glass materials, and complex graphic cutting of silicon wafers.

The uv laser marking machine adopts imported core components and is equipped with high-speed and high-precision 3D galvanometer. Combined with the 3D special software and control system independently developed by our company, it can perfectly realize the fine processing of any curved surface workpiece without the focus phenomenon; The uv laser marker can also be used for deep engraving. The focus tracking in real time makes the processing efficiency and quality better than the traditional 2D marking machine. Realize the full realization of 3D marking function, leading laser processing into a new era. The three-dimensional UV laser machine adopts imported high-quality ultraviolet laser source. The 355nm uv light focuses on the spot, and the processing heat affected zone is very small. It is suitable for processing materials with large thermal radiation response. The uv laser marking machine is mainly used for superfine marking and special material marking,carving and cutting. Widely used in the high-end market of ultra-fine laser processing.
3D 355nm UV Laser Marking Machine for PC PP PE Marking

1. The uv laser marking machine has stable performance, small volume, low power consumption, high electro-optical conversion efficiency and long service life;

2. The laser spot output is very small, and the light mode is good, which is suitable for occasional markings such as fine graphics;

3. The laser beam quality is good, the output laser stability is high, the marking effect is easy to debug;

4. The uv laser marking machine has high average power and high repetition frequency, marking speed is faster;

5. The uv laser marking machine adopts marble working platform, which has good earthquake resistance and stress resistance, good flatness and high stability;

6. The product subverts the traditional 2D marking mode, achieving a variety of 3D marking modes such as bevel, step, cylinder, cone, spherical, and stretched surface;

7. The uv laser marking machine can achieve super large center angle marking, on the cylinder can hit the 117 ° center angle position..

8. On the marking workpiece, the target marking pattern is perfectly presented to avoid deformation such as elongation and tilt. Let the engraved pattern be closer to the original form.

9. Let the marking boundary no longer be "ignored"! The marking effect of each position on the workpiece is uniform and consistent;

10. 355nm output wavelength reduces the thermal impact on the workpiece, the heat affected area is very small, there is no thermal effect, the material is not deformed and not burnt;

11. The uv laser marking machine adopts the upper and lower sliding door closed processing in the design, and the uv laser marker uses the high-quality special filter to protect the plexiglass to make a special observation window to create the ultimate protective performance of the whole machine;

12.The uv laser marking machine can be equipped with automatic lifting, rotating and other functions. 3D 355nm UV Laser Marking Machine for PC PP PE Marking

It is suitable for processing materials with large thermal amplitude response. It can be matched with production line, automatic loading and unloading, automatic feeding and discharging, mainly used for ultra-fine marking and engraving. It is especially suitable for high-speed division of food, medical packaging and glass materials. Silicon wafers for applications such as complex graphics cutting.

3D 355nm UV Laser Marking Machine for PC PP PE Marking

Model	3W/5W	7W/10W
Laser type/wave length	355nm
Laser output power	3W/5W	7W/10W
Beam quality	<1.1	<1.3
Marking speed	400 characters per second	500 characters per second
Repeated accuracy	±0.001mm
Working area	110×110mm or 180×180mm ( adjustable )
Machine power	800W	1200w
Power supply	380V/50-60Hz or 220V/50-60Hz
Minimum character	0.1mm
Minimum line width	0.015mm
Life of the laser machine	>100,000 hours
Cooling system	Water Cooling
Control interface	Standard USB
Overall dimensions	900mm×680mm×1200mm