Recycled and Thin Textured Wood Plastic Flooring

China Recycled and Thin Textured Wood Plastic Flooring, Find details about China Recycled and Thin Textured Wood Plastic Flooring, Textured Wood Plastic Flooring from Recycled and Thin Textured Wood Plastic Flooring

Model NO.
ZT 121134
Pattern
Wood Grain
Color
Single Color
Usage
Household, Commercial, Sports
Trademark
ZT Floor
Transport Package
Cartons with Pallets
Specification
6*36 7*48 6*48
Origin
China
HS Code
391810900
Model NO.
ZT 121134
Pattern
Wood Grain
Color
Single Color
Usage
Household, Commercial, Sports
Trademark
ZT Floor
Transport Package
Cartons with Pallets
Specification
6*36 7*48 6*48
Origin
China
HS Code
391810900
Product Description
Recycled and Thin Textured Wood Plastic Flooring

 

Plank Size: 152.4*914.4 mm           Tile Size: 304.8*609.6mm

         184.9*1219.2mm

         228.6*1219.2mm

         190*1240mm

         152.4*1219.2mm

Large Plank Size: 1238*225mm        XL Size: 1810*234mm

              1238*178mm

              1238*146mm

All the floor surfaces can be produced into any sizes that listed above.

 Recycled and Thin Textured Wood Plastic Flooring

Warranties: Lifetime Residential Wear

          Lifetime waterproof

          Lifetime Structure

          10 Years Commercial Wear

Installation Areas: Below,on,or Above Grade   Compliance: CARB Compliant

 Recycled and Thin Textured Wood Plastic Flooring

 

Every step of process is under controlled seriously to make sure final products quality .

Recycled and Thin Textured Wood Plastic Flooring
 

Packaging & Shipping

Recycled and Thin Textured Wood Plastic Flooring

 

In-Floor Radiant Heat: 

PVC flooring can be installed over radiant heat using the floating or glue down method.

When gluing floor,use only FNLS recommended multipurpose adhesive over manufactuer's

Recommended substrate.

Turn the heat off for 24 hours before, during and 24 hours after installation when installing over

Radiant heated subfloors. 

Failure to turn the heat off may result in significantly shortened working time of the adhesive

Floor temperature must not exceed 30°C

Once the installation has been completed ,the heating system should be turned on

and increased gradually(5 degree increments) until returning to normal operating

conditions.

Failure to strictly follow adhesive manufacturer's guidelines may result in failure

And void the warranty.

Warning: Electric heating mats that are not embedded into the subfloor are not recommended for use underneath FNLS.Using electric heating mats that are not embedded and applied directly underneath FNLS could void the warranty for your floor

In case of failure. It is best to install FNLS over embedded radiant floor

Heating systems and adhere to the guidelines listed above.

Company Information

Recycled and Thin Textured Wood Plastic Flooring