Neonate Radiant Infant Warmer for baby Newborn resuscitation infant phototherapy unit
Model No.:MSLBI10
Power supply: ~ 220V, 50/60 Hz |
Power input: 1000VA |
Environment temperature: 18ºC~30ºC |
Relative humidity: 30%~75% |
Atmospheric pressure: 700~1060hPa |
Air velocity: <0.3m/s |
Temperature control range: 32ºC~38ºC |
Precision of temperature control: ≤0.5ºC |
Infant radiant warmer of model MSLBI10 adopts anti-explosion micro crystal quartz infrared radiation tube for its radiation source. In its instruction, the radiator can rotate freely in about ±90 degree both in counter-clock and direct-clock, the obliquity of the bed can be done continuously and is controllable, there is a X ray black-box shelf under the bed. Infant radiant warmer of model MSLBI10 has three operation modes: pre-heat, auto and manual, the indicator shows under which mode the equipment is running, the testing temperature and setting temp is shown independently in the screen, the light for caring the baby uses LEDs lamp, the angle in the direction of both front and back can be controlled. The equipment will alarm with sound and light if failure and exceptional situation comes out when using the infant radiant warmer.
This instruction consists of instruction of usage and techniques, and is suitable for the installation, usage, cleanout, maintenance and analysis and solution of common failure of infant radiant warmer of model MSLBI10.
Some parts of the products used may not be the same as the ones in the introduction list and circuit diagram, that is because our company put improved parts and circuits into use before putting them into printed introduction.