ZETA'S Standard and Technical Specification

Warranties: Lifetime Residential Wear
Lifetime waterproof

         Lifetime Structure
        10 Years Commercial Wear

In-Floor Radiant Heat: 

PVC flooring can be installed over radiant heat using the floating or glue down method.

When gluing floor,use only FNLS recommended multipurpose adhesive over manufactuer's

Recommended substrate.

Turn the heat off for 24 hours before, during and 24 hours after installation when installing over

Radiant heated subfloors. 

Failure to turn the heat off may result in significantly shortened working time of the adhesive

Floor temperature must not exceed 30°C

Once the installation has been completed ,the heating system should be turned on

and increased gradually(5 degree increments) until returning to normal operating

conditions.

Failure to strictly follow adhesive manufacturer's guidelines may result in failure

And void the warranty.

Warning: Electric heating mats that are not embedded into the subfloor are not recommended for use underneath FNLS.Using electric heating mats that are not embedded and applied directly underneath FNLS could void the warranty for your floor

In case of failure. It is best to install FNLS over embedded radiant floor

Heating systems and adhere to the guidelines listed above.