Products

BMS 16s LFP LiFePO4 Battery Packs BMS/PCB/Ocm Protection Board with Balance

China BMS 16s LFP LiFePO4 Battery Packs BMS/PCB/Ocm Protection Board with Balance, Find details about China BMS 10s, Car Started BMS from BMS 16s LFP LiFePO4 Battery Packs BMS/PCB/Ocm Protection Board with Balance

Model NO.
LWS-30S80A-430(16S)
HS Code
8536300000
Model NO.
LWS-30S80A-430(16S)
HS Code
8536300000
BMS 16S LFP lifepo4 battery packs bms/pcb/ocm protection board with balance 

1. About the bms 
Function:
Detect and protect the battery from over-charge  ,over-dicharge, over-current short-circuit temperature detecting protection  and auotmatically voltage balance function . Build with high end electronic components (High End IC and MOSFET ) ,simple structure design will let it have more stable quality working performance , Flexible application ( it can be used for less series battery by leaving some connection pins at empty status ),full set of protection measures let it works well without any infulence from external unexpected accidents.Please consult the salesman for specific parameters.

Description:
The protection plate is a semi-finished product, which needs to be used in combination with the battery. Before use, please make sure that the battery is in good consistency (internal resistance voltage multiplying ratio). This product contains technical knowledge. Once installed incorrectly, it will lead to board burning, tube bursting and other situations. Please explain in detail before installation. Novice buyers should install it under the technical guidance.


2. Product details
BMS 16s LFP LiFePO4 Battery Packs BMS/PCB/Ocm Protection Board with Balance
Shenzhen Li-ion Battery Bodyguard Technology Co.,LTD
PCM Specifications For 51.2V (16S) Lifepo4 Battery Packs
Model: LWS-30S80A-430(16S)
NO.Test itemCriterion
1VoltageCharging voltage
57.6±0.05V
Balance voltage for single cell
3.5±0.025V
2CurrentBalance current for single cell35±5mA
Current consumption single cell
≤25μA
Maximal continuous charging current80A
Maximal continuous discharging current80A
3
Over charger protection
 
Over charge detection voltage for single cell
3.75±0.025V
Over charge detection delay time500mS-1500mS
Over charge release voltage for single cell3.55±0.05V

4
 

Over discharger protection
 
Over discharge detection voltage for single cell
2.2V±0.0625V
Over discharge detection delay time
500mS-1500mS
Over discharge release voltage for single cell
2.7±0.075V


5

 

Over current protection
 
Over current detection voltage
100±25mV
Over current detection current250±30A
Detection delay time10mS-50mS
 Release conditioncut load 
6
Short protection
 
Detection condition
Ecterior short circuit
Detection delay time
230-500uS
Release condition
cut load 
7ResistanceProtection circuitry(MOSFET)≤20mΩ
9TemperatureOperation Temperature Range-40ºC~+85ºC
Storage Temperature Range-40ºC~-125ºC

Only as a general reference parameter. If you have special requirements for some parameters, please contact the service personnel, and we will send the new specifications according to your requirements(Li-ion or lifepo4)

3.Company information
Shenzhen Li-ion Battery Bodyguard Technology Co.,Ltd was founded in 2013.
Mainly provide Battery PCM & BMS for Lithium ion ,Lifepo4 ,LTO battery pack.

Since 2013, the company has more than 400 types of hardware PCM/BMS,and software BMS including  HDQ/12C/SMBUS/RS482/RS232 & Bluetooth and so on. Mainly covers battery assembly 1S-35S in series ,working current up to 350A;the products are widely used in solar street lamp,golf ,LED light,power tool,electric bicycle,medical equipment,EV application......etc.
BMS 16s LFP LiFePO4 Battery Packs BMS/PCB/Ocm Protection Board with Balance

BMS 16s LFP LiFePO4 Battery Packs BMS/PCB/Ocm Protection Board with Balance

4. Related products
BMS 16s LFP LiFePO4 Battery Packs BMS/PCB/Ocm Protection Board with Balance
BMS 16s LFP LiFePO4 Battery Packs BMS/PCB/Ocm Protection Board with Balance
5. Transportation

Packing: Inner packing:Vaccum packing/Plastic bag. 

              Outer packing:Standard carton packing or packing per customer's requirements.

Delivery type:by air such as TNT,UPS,FEDEX or by sea ,just depend on your convenient.

Payment:T/T, Paypal
 


BMS 16s LFP LiFePO4 Battery Packs BMS/PCB/Ocm Protection Board with Balance

5.FAQ
Q: How do I judge what material my battery is ?
A: Please take a look at the battery body.if the normal voltage of your battery shows as 3.2V,the battery will be LiFePo4.If the normal voltage of your battery shows as 3.6V or 3.7V, the battery will be Li-ion or Li-polymer battery. you can also ask battery manufacturer the material of battery.

Q: Can I use this protection circuit board for my battery?
A: Can use this protection circuit board, or not?
There are 2 questions:
How much cells in series is your battery pack?
The protection circuit board you need to buy must be same cells in series as your battery pack.

Q: What material is your battery?
A:Only the LiFePo4 battery has different electric parameter from other battery, so if you need buy the protection circuit board for LiFePo4 battery , Please let us know firstly.

Q: Do we need cell balance or not?
A: The function of balance : Since battery is made of many pcs of cells in parallel and in series, the cells can't be the same as no two people in the world is the same , so can only put in group with similar performance is not without balance function

Q: Do you have Minimum Order Requirement (MOQ)?
A: No, We don't have MOQ, Different customer have different requirement ,We can provide various capacity and size as per your requirements,Also ODM / OEM is welcome.

About your products, just tell us the relative voltage/ cells/ current A or equipment etc,we will help to recommend the most suitable products for you.

You Might Also Like