Condensed Two Components Potting Silicone Sealant LSR
China Condensed Two Components Potting Silicone Sealant LSR, Find details about China General Purpose Silicone Sealant, Dowcorning Silicone Sealant from Condensed Two Components Potting Silicone Sealant LSR
Basic Info.
Model NO.
660
Trademark
TBL
Specification
10: 1
Origin
Foshan, Guangdong, China
Model NO.
660
Trademark
TBL
Specification
10: 1
Origin
Foshan, Guangdong, China
Product Desciption
Description
660 series are RTV potting silicone rubber, two components type, with low viscosity and good flowing property, flow quickly and surface is smooth. Deep curing is fast, alcohol molecules are released during curing process, won't corrode the materials such as copper wires, after curing the performance of resistance to cold and hot cycle and outdoor anti-aging is excellent, good adhesion to most of electronic parts.
Application
Potting to LED lamp modules of display screens, washing wall lamps, project lamps, underground lamps, underwater lamps also potting and protection to common electronic components and circuit boards.
Technical Data
How to Use it
Weighing: mix A & B components separately, weigh A & B components as per weight ratio 1:1 exactly.
Mixing: put B component to A component, mix evenly, it can be finished by hand or equipment.
Defoaming: natural defoaming if the potting thickness is less than 20mm, vacuum defoaming if the potting thickness is more than 20mm.
Potting: pot the silicone rubber into the products which need to be potted quickly.
Curing: cured at room temperature, after initial curing workers can continue the next working process, complete cured is finished in 24 hours.
Packing
A & B component separately, 22kgs/set ( A component 20kgs/barrel, B component 2kgs/bottle)
Remark
The above information is based on our extensive experiments, results are reliable. However, because practical application is varied, we can't control the application condition, users need to confirm whether the product is suitable by testing before mass production. Our company aren't responsible for any direct, indirect or accidental loss when the products are used in specific condition. If user have any problem with our products, please contact with our technical service department, we will try our best to offer the most possible help.
Our Policy
1. Sample: Sample is free for our valuable customer.
2. OEM: OEM service is provided for our valuable customer.
3. Welcome to visit our factory anytime.
4. Welcome to be our brand "TBL" distributor in your local place.
Our Company
660 series are RTV potting silicone rubber, two components type, with low viscosity and good flowing property, flow quickly and surface is smooth. Deep curing is fast, alcohol molecules are released during curing process, won't corrode the materials such as copper wires, after curing the performance of resistance to cold and hot cycle and outdoor anti-aging is excellent, good adhesion to most of electronic parts.
Application
Potting to LED lamp modules of display screens, washing wall lamps, project lamps, underground lamps, underwater lamps also potting and protection to common electronic components and circuit boards.
Technical Data
| Indicators | Specification | ||
| Before Curing | Specific Gravity (g/cm³, 25ºC) | A: 0.98-1.3 B: 0.98 | |
| Viscosity (mpa.s, 25ºC) | A: 1000-5000 B: 20-80 | ||
| Mixing Ratio (A:B) | 10:1 | ||
| Viscosity after mixing (mpa.s, 25ºC) | 900-4000 | ||
| Operating Time (min, 25ºC) | 30-120 | ||
| Initial Curing Time (h) | 3-5 | ||
| Complete Curing Time (h) | 24 | ||
| After Curing | Mechanical Properties | Durometer (Shore A) | 5-40 |
| Tensile Strength (Mpa) | ≥0.4 | ||
| Shear Strength (Mpa) | ≥0.4 | ||
| Electrical Properties | Dielectric Strength (KV/mm) | ≥18 | |
| Dielectric Constant (50Hz) | 3.0 | ||
| Volume Resistivity (Ω.cm) | ≥1x1014 | ||
How to Use it
Weighing: mix A & B components separately, weigh A & B components as per weight ratio 1:1 exactly.
Mixing: put B component to A component, mix evenly, it can be finished by hand or equipment.
Defoaming: natural defoaming if the potting thickness is less than 20mm, vacuum defoaming if the potting thickness is more than 20mm.
Potting: pot the silicone rubber into the products which need to be potted quickly.
Curing: cured at room temperature, after initial curing workers can continue the next working process, complete cured is finished in 24 hours.
Packing
A & B component separately, 22kgs/set ( A component 20kgs/barrel, B component 2kgs/bottle)
Remark
The above information is based on our extensive experiments, results are reliable. However, because practical application is varied, we can't control the application condition, users need to confirm whether the product is suitable by testing before mass production. Our company aren't responsible for any direct, indirect or accidental loss when the products are used in specific condition. If user have any problem with our products, please contact with our technical service department, we will try our best to offer the most possible help.
Our Policy
1. Sample: Sample is free for our valuable customer.
2. OEM: OEM service is provided for our valuable customer.
3. Welcome to visit our factory anytime.
4. Welcome to be our brand "TBL" distributor in your local place.
Our Company
You Might Also Like
Low Cost 2-8mm Coffee Husk Hen Feed Press for Pakistan
Nice Design 90km Mileage Electric Scooter with Front Basket
A356 Aluminum Sand Casting Parts
3-Blade Aluminum Outboard Propeller
Mercedes Benz W639 Vito Viano Air Compressor 6393200204 6393......
Made in China Metal Zinc Alloy Soft Enamel Sport Medallion C......
10t 30t 40t Locosc Shear Beam Weighing Load Cell for Weighbr......
4.1kwh Lithium Battery Wall Mount LiFePO4 24V 160ah Deep Cyc......
A3 Size DTG Tshirt Jeans Jackets Printer for Dark Light Colo......
PVC Co-Extrusion Foam Board with Cheaper Price
Superior Popular Art Fineliner Drawing Pen with Water Proof ......