Products

Two-Parts Electronic Potting Silicone Compound Use for LED

China Two-Parts Electronic Potting Silicone Compound Use for LED, Find details about China Rubber, RTV Silicone from Two-Parts Electronic Potting Silicone Compound Use for LED

Model NO.
TM2511, DY2100
Trademark
XD silicone
Specification
10KG, 20KG, 40KG, 50KG, 200KG
Origin
Beijing
HS Code
3910000000
Model NO.
TM2511, DY2100
Trademark
XD silicone
Specification
10KG, 20KG, 40KG, 50KG, 200KG
Origin
Beijing
HS Code
3910000000
Two-Parts Electronic Potting Silicone used for  LED displayers, power module and electronics components and Wind Power Generator, PCB substrate.

Electronic potting silicone is No bubbles, good flatness and gloss, high hardness,Cured products with good flame retardant property,Good resistance of humidity and weather aging 
 
ModelTM2511DY2100
Mixing ratio (A:B)1:11:1
Hardness (Shore A)≥250
Tear-strength (%)200100
Viscosity ( mixed 25°C mpa.S)                      500±5020000±2000
Cured condition60ºC/1h or room temperature /12h60ºC/1h or room temperature /12h

How to use:
1. Use acetone or solvent type products to clean electronic components that need to be sealed to remove impurities.
2. Mix A/B evenly in A 1:1 (weight ratio) ratio, and remove the bubbles from the vacuum machine.
3. Slowly pour the stirred silica gel into the electronic components to be sealed

Pls email me if any question, and we can do as custoemer need specification !
Two-Parts Electronic Potting Silicone Compound Use for LED





 

You Might Also Like