Products

Tin Cured Silicones for Plaster Cornice Moulds

China Tin Cured Silicones for Plaster Cornice Moulds, Find details about China RTV Silicone Rubber, Silicone Rubber from Tin Cured Silicones for Plaster Cornice Moulds

Model NO.
Hy-6 series plaster molding silicone
Color
Red, Yellow, Green, White
Certifications
RoHS.MSDS.SGS ISO9001:2000
Brand
Hong Ye Silicone Rubber
MOQ
200 Kgs
Shelf Life
1 Year
Sample
Available
Port
Shenzhen
Trademark
Hong Ye Silicone Rubber
Specification
RoHS, ISO-2001, SGS
Origin
Shenzhen
HS Code
39100000
Model NO.
Hy-6 series plaster molding silicone
Color
Red, Yellow, Green, White
Certifications
RoHS.MSDS.SGS ISO9001:2000
Brand
Hong Ye Silicone Rubber
MOQ
200 Kgs
Shelf Life
1 Year
Sample
Available
Port
Shenzhen
Trademark
Hong Ye Silicone Rubber
Specification
RoHS, ISO-2001, SGS
Origin
Shenzhen
HS Code
39100000

 

tin cured silicones for plaster cornice moulds
 

Descriptions of liquid slicone for molds for making plaster molding

 liquid  silicone rubber is generally named two-components silicone

rubber, Part A and part B. It features an exceptional fluidity and good operability. The

mixing ratio is 1:1,mainly be suitable for making molds application.

 

Applications of liquid slicone for molds for making plaster molding

liquid  silicone rubber could be mainly used for food mold , such as chocolate mold , cake mold , it is also used for making concrete  stones, wax molds, PU molds, resin molds, gypsum casting, candle molding .

 

Advantages of liquid slicone for molds for making plaster molding

-low shrinkage (less than 0.1% )

-high tensile and tear strength with high copy times

-easy for operation (mixing ratio at 1:1 /10:1)

-good fluidity easy for pouring operation ( in round 10000 cps )

-it is food grade with FDA
Tin Cured Silicones for Plaster Cornice Moulds

Datasheet:

 

Product

Hy-635

Appearance

white

Hardness(shore A)

35±2

Mix ratio(A:B)

1:1

Viscocity (mPa.s)

 12000±2000

Tensile strength (kgf/cm2)

50±5

Tear-strength (kN/m)

18±2

Elongation(%)

450±50

Pot life/working time (mins)

30-40

Curing time/setting time (hrs)

3-4hrs(25°C)

110-20mins(60°C)

Shrinkage rate (%)

≤0.1%

 Tin Cured Silicones for Plaster Cornice Moulds

Operation instruction of silicone rubber :

1. Pls clear the model and tool totally before operation to prevent cure inhibition.

2.Weigh the two part correctly by electronic weight in two separate container .

3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .

4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3

minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly

down the side of the mold frame so that less bubbles caused)

5. Enclose the product (the original model) with four plastic plates or wooden plates.

6. Clean your products and brush a layer of release agent(detergent or soap water) on

your product.

7. Pour the vacuumed mixture into the model frame from the side of the mold frame .

 

Call Us Anytime With Questions About Your Application. 

More information , pls feel free to contact Ms Hebbe:
   

 

 

You Might Also Like