Products

Tyre Moulding Liquid Silicone Rubber, Platinum and Condensation Cured Silicones

China Tyre Moulding Liquid Silicone Rubber, Platinum and Condensation Cured Silicones, Find details about China Platinum Cure Silicone, Silicone from Tyre Moulding Liquid Silicone Rubber, Platinum and Condensation Cured Silicones

Model NO.
HY-E620
Tensile Strength(MPa)
8
Tear Strength( Kn/M)
15
Certificate
RoHS. MSDS. SGS ISO9001: 2000
Trademark
HongYe silicone rubber
Transport Package
20kg/Drum, 200kg/Drum
Specification
RoHS. MSDS. SGS ISO9001: 2000
Origin
Shenzhen China
HS Code
39100000
Model NO.
HY-E620
Tensile Strength(MPa)
8
Tear Strength( Kn/M)
15
Certificate
RoHS. MSDS. SGS ISO9001: 2000
Trademark
HongYe silicone rubber
Transport Package
20kg/Drum, 200kg/Drum
Specification
RoHS. MSDS. SGS ISO9001: 2000
Origin
Shenzhen China
HS Code
39100000

liquid tire/tyre mould making silicone rubber


1. Application for liquid tire/tyre mould making silicone rubber

liquid tire/tyre mould making silicone rubber is mainly used to make soft silicone products, such as sex toys, silicone dolls, love dolls, silicone mask, body organs, body breast enhancers, shoulder pads, paster, trackion, mask, etc.

2. Features for liquid tire/tyre mould making silicone rubber

liquid tire/tyre mould making silicone rubberbe used for a long period and maintain softness and elasticity within a temperature range of -65° C ~ 200° C with the characteristics of excellent electrical performance and chemical stability, waterproof, ozone and climate resistance, non-corrosiveness, physical inertia, non-toxic, odourless, low linear shrinkage, easy operation, etc.


3. Using instructions for liquid tire/tyre mould making silicone rubber

Mix component A and component B evenly according to the mixing proportion of 1: 1, and can be poured after deair the bubbles. The operating time (5-10) mins depends on the temperature; The curing time is 20-30 mins at the room temperature; And the curing time can be reduced to 10 minutes with the temperature increased to 80~120° C. The operating time of the room temperature quick drying type is less than 20 minutes and the curing time is 0.5 hour. The product can be produced in skin color, yellow, etc. According to the customer's requirements.
ert

4. Precautions for liquid tire/tyre mould making silicone rubber

Skin Safe Silicone Rubber for Silicone Masks Making is platinum-catalyzed silicone rubber, water, impurity, organic tin catalyst, acid, alkaline and other organisms containing sulfur, phosphorus and nitrogen will influence the vulcanization of the silicon rubber. So, please do not mix with or touch those substances during using.

5.Datasheet of liquid tire/tyre mould making silicone rubber
 
ModelHY-E620#
AppearanceBlue
Mixing Ratio1:1
Operating time (Mins 25°C)30 - 40
Curing time (Mins 25°C)4-6h
Curing time (Mins 60°C)2-3h
Hardness (A°)20±2
Density ( g/cm 3 )1.08
Viscosity (CS) (Part A)30000 ± 5000
Viscosity (CS) (Part B)5000 ± 500
Viscosity (CS) (After mixed)10000 ± 2000
Tensile-strength( kgf /cm2 )100 ± 20
Tear-strength (kgf /cm2 )18 ± 2
Elongation-break(%)350 ± 50
Retractility(%)≤0.1
 

6. Package for liquid tire/tyre mould making silicone rubber

Tyre Moulding Liquid Silicone Rubber, Platinum and Condensation Cured Silicones

7. Transportation for liquid tire/tyre mould making silicone rubber
Regard as non-hazardous goods, with shelf life of half year, hermetically sealed, with prevention from being in contact with acid, alkaline, and other impurities.



More information , pls feel free to contact Mr.Joe:

Contact: Joe Jiang
 
 
 
 
 
 

You Might Also Like