Reci W2 100W CO2 Laser Cutting Machine with Knife Blade Table for Non-Metal Material

China Reci W2 100W CO2 Laser Cutting Machine with Knife Blade Table for Non-Metal Material, Find details about China Laser Engraving Machine, Engraving Machine from Reci W2 100W CO2 Laser Cutting Machine with Knife Blade Table for Non-Metal Material

Model NO.
M900E
Applicable Material
Nonmetal
Type
Oscillating Mirror
Laser Classification
Gaseous Laser
Engraving Method
Lattice Engraving
Working Size
600*900mm (36" X 24")
Laser Tube Power
Reci W1 80W, W2 100W
Electronic Lift Table
PP and Down 200mm(0~7.87")
Two Way Pass Through
Yes
Voltage
110V~240V
Treated Material
Acrylic, MDF, Plywood, Leather, Cloth, Fur, Double
Cotroller
Ruida/ Topwisdom
Software
Rdworks/Autolaser
Trademark
Redsail
Transport Package
Wooden Box
Specification
600*900mm
Origin
China
HS Code
8456110090
Model NO.
M900E
Applicable Material
Nonmetal
Type
Oscillating Mirror
Laser Classification
Gaseous Laser
Engraving Method
Lattice Engraving
Working Size
600*900mm (36" X 24")
Laser Tube Power
Reci W1 80W, W2 100W
Electronic Lift Table
PP and Down 200mm(0~7.87")
Two Way Pass Through
Yes
Voltage
110V~240V
Treated Material
Acrylic, MDF, Plywood, Leather, Cloth, Fur, Double
Cotroller
Ruida/ Topwisdom
Software
Rdworks/Autolaser
Trademark
Redsail
Transport Package
Wooden Box
Specification
600*900mm
Origin
China
HS Code
8456110090

New! 80W RUIDA CO2 Laser Engraving Cutting Machine 

Motorized Up and down work table: 200mm

Working Area: 600mm* 900mm (24″x 36″)

 
Reci W2 100W CO2 Laser Cutting Machine with Knife Blade Table for Non-Metal Material
  

Product Description

1. The transmation structure: Linear guide+Slide block.
2. Machine structure: Box type laser machine, no bracket.
3. Lens spec: 25mm Mirror+20mm focal lens, focal length 63.5mm.
4. Air pump and fan socket have seperate switch control, simple operation.
5. Air assist, attach an air compressor to our included air assist to remove heat and combustible gases from the cutting surface 
6. Cross red positioning optional. 
7. Rotary attachment is controlled by toggle switch, the operation is simple.
8. Ethernet, USB2.0 and U-disk transmission, compatible with Windows XP/Vista/7/8/10, work independently from PC, which is useful for the quantities of engraving and cutting production.
9. Full support for CorelDraw, AutoCAD, etc. CE and FDA certificate, more reliable.
10. The installation position of each door is reserved for ground pole and cover protection switch to improve the safety of the whole machine.

 

Reci W2 100W CO2 Laser Cutting Machine with Knife Blade Table for Non-Metal Material
Adjustable Laser head

The aluminum alloy adjustable laser head is lighter than other matal laser heads, which can minimize the inertia error when the laser head moves. The structure is simple , the opration is convenient , the device is dtable, and the maintenance is low.
Ruida Controller
UP and DOWN table with stepper motor, speed more quickly and platform more stable.

Emergency Button(E-Switch)
Reci W2 100W CO2 Laser Cutting Machine with Knife Blade Table for Non-Metal Material
Reci W2 100W CO2 Laser Cutting Machine with Knife Blade Table for Non-Metal Material
The second reflection mirror fixture mount
15 mm Linear Guide Rail in Y axis (right)
Reci W2 100W CO2 Laser Cutting Machine with Knife Blade Table for Non-Metal Material
Reci W2 100W CO2 Laser Cutting Machine with Knife Blade Table for Non-Metal Material
15 mm Linear Guide Rail in Y axis (left)
Motorized up and down table 200 mm

Adopt stepper motor, the parallelism of the 4 corners of the platform is better
Reci W2 100W CO2 Laser Cutting Machine with Knife Blade Table for Non-Metal Material
Reci W2 100W CO2 Laser Cutting Machine with Knife Blade Table for Non-Metal Material
1. The 1st Red Switch is for Air Pump.
2. The 2nd Red Switch is for the fan.
3. The 1st Black Switch is for the fan.
4. The 2nd Black Switch is for the the overide Switch.
(Overide Switch means when this Switch is turn on you can not let the machine work with the lid open, only after you turn off=this switch, the machine will work with the lid open.)
5. USB port
6. U-Disc port
7. Ethernet port

 

 

Standard Accessories

  • User Manual 
  • CW-3000 Water Chiller
  • Air Pump
  • Centrifugal fan
Reci W2 100W CO2 Laser Cutting Machine with Knife Blade Table for Non-Metal Material
Reci W2 100W CO2 Laser Cutting Machine with Knife Blade Table for Non-Metal Material
 

  • Communication cable
  • 3 Reflect optics (installed)
  • 1 Focus optics (installed)
  • 1 Laser tube
  • Other tools

Optinal Accessories

  • Topwisdom Control System
    CW-5000 Water Chiller
    RECI W2 100W laser tube
    Honeycomb table
  • Rotary attachment
  • Cross red positioning
  • Ground Wire
  • Connect magnetic switches for door
  • Auto focus

Product Parameters

Control SystemDSP
Working size36"x24"(900mm x 600mm)
Laser tube typeCO2 glass sealed laser tube
Laser power80W
Drive typemicro stepping motor
Max speed1000mm/s
Resolution1000DPI
Location precisionLocation precision
PC interfaceUSB 2.0 and USB Disk
SoftwareAutolaser
Image formHPGL, BMP, GIF, JPG, JPEG, DXF, DST, PLT etc.
Warranty12 months for machine, 18 months for tube
Packagestandard wooden case for export

 

Sample

Reci W2 100W CO2 Laser Cutting Machine with Knife Blade Table for Non-Metal Material

Packaging & Shipping

Reci W2 100W CO2 Laser Cutting Machine with Knife Blade Table for Non-Metal Material

The machine is well packed in wooden box and we buy insurance for the shipping.

FAQ

Q: Do I need two laser machines to engrave and cut separately?
A: No, the laser machines we provide are capable of both engraving and cutting. One machine alone can fulfill the two purposes.
Q: Do the laser machines need to be connected to a laptop or desktop computer to work?
A: Yes, either is ok. It supports Windows 10, Windows 2000, Windows XP, Win 7, and other operating systems.
Q: What kind of graphic format does it support?
A: JPG, PNG, BMP, PLT, DST, DXF, CDR, AI, DSB, GIF, MNG, TIF, TGA, PCX, JP2, JPC, PGX, RAS, PNM, SKA, RAW , etc.
Q: How to distinguish laser tubes with different powers and applications?
A: 1. Laser tube length (relatively speaking, the longer, the bigger)
2. Laser tube diameter (relatively speaking, the thicker, the bigger)
3. The bigger a laser tube power is, the deeper the machine can cut, but its light spot is bigger. So, it is better to use a machine with a low-power laser tube to engrave, such as 40W, 50W or 60W.
Q: Is it better to increase blow to improve laser processing performance?
A: For some thick materials, it works. But, when carving some other materials, you need to blow less.
Q: How long will it take to learn to operate a laser machine?
A: If you are able to use some basic graphic design software, it will only take a few hours to master the operation. You just need to do some simple tests on different processing materials to know how to set the correct speed and laser power.
Q: Is a laser machine in operation harmful to our bodies?
A: It is not harmful as long as the laser is not exposed directly to skin and eyes.