Products

Hotmelt Sealant for Insulating Glass-Mf910h

China Hotmelt Sealant for Insulating Glass-Mf910h, Find details about China Hotmelt Sealant, One Components Sealant from Hotmelt Sealant for Insulating Glass-Mf910h

Model NO.
MF910H
Characteristic
Waterproof
Promoter Composition
Curing Agent
Composition
Organic Material
Color
Black
Trademark
SILANDE
Transport Package
Drum
Specification
6.5kg/box
Origin
China
HS Code
3506919090
Model NO.
MF910H
Characteristic
Waterproof
Promoter Composition
Curing Agent
Composition
Organic Material
Color
Black
Trademark
SILANDE
Transport Package
Drum
Specification
6.5kg/box
Origin
China
HS Code
3506919090
Hotmelt Sealant for Insulating Glass-Mf910h

DESCRIPTION

SILANDE MF910H is a hot melt sealant formulated for single seal insulating glass. This product has been designed for insulating glass manufacurers running hand applied, semi-automated, and linear extruded operations.

FEATURES
One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for secondary sealing of insulating glass units.It can keep its plastic and sealing properties in a wide temperature range.Excellent adhesiopn properties on glass, aluminium alloy, galvanized steel and stainless steelImmediate high strength developement for superior handing and transportation capabilities.Excellent slump resistance, resulting in reduce after-application tooling.Low after-application tack for easy of handing.Minimum moisture vapour and gas permeation.Excellent temperature stability: -30ºC to 80ºC.
SHELF LIFE AND STORANGE
24 months stored in cool, dry and ventilated places.

PACKING
6.5 kg/box
220 kg/drum (φ571.5mm)

MF910/ MF910G/MF910T Insulating glass with butyl hot-melt sealant: used for the first sealing of insulating glass, it can form an excellent anti-moisture system together with elastic sealant.
MF910H single-pass butyl hot-melt sealant for insulating glass: It has good adhesion to glass, aluminum alloy, galvanized steel, stainless steel and other materials, has good water resistance and high strength, so double-layer sealing is not required

MF910S Thermoplastic spacer for insulating glass: It has excellent adhesion to glass, and has certain rigidity. It can absorb water vapor between the glass, integrate the functions of aluminum strip, molecular sieve and butyl rubber, and can be sealed with elasticity. The glue together constitutes an excellent anti-moisture system.

Welcome to send email for PDF documents and quotation.

Hotmelt Sealant for Insulating Glass-Mf910h
According to the method specified in GB/T1033
(Dipping method) proceed.
Data accuracy is controlled within ±0.0001g
 Mettler analytical balance
Hotmelt Sealant for Insulating Glass-Mf910h
Hotmelt Sealant for Insulating Glass-Mf910h
In this test, according to the JC/T 914 standard, 6 cube specimens with a side length of 20mm were made. After weighing, they were placed horizontally under standard conditions for 8 hours, and 5 of them were placed in an oven at 130°C. After 50h, measure the mass loss of the heat-treated sample and check the surface changes.
Hotmelt Sealant for Insulating Glass-Mf910h
Sample
This indicator is to characterize the pros and cons of product flexibility. The test refers to the method specified in the recovery value in GB/T 12828, and the sample is a cube with a side length of 20mm.

Hotmelt Sealant for Insulating Glass-Mf910h
William Plastometer
This index characterizes the softness and hardness of the product at room temperature and the hot melt performance and rheological properties at high temperature. The normal temperature value (25°C) characterizes the state of the sealant during use; the high temperature value (130°C) characterizes the state of the sealant during construction. The test method adopts the JC/T914 standard, the test mold is type A, and the test time is 5s.
Hotmelt Sealant for Insulating Glass-Mf910h
Hotmelt Sealant for Insulating Glass-Mf910h
Penetration Tester

 

You Might Also Like