Maydos Eco-Friendly Easy Spraying Nitrocellulose Nc Wood Varnish Lacquer for Furniture
China Maydos Eco-Friendly Easy Spraying Nitrocellulose Nc Wood Varnish Lacquer for Furniture, Find details about China One Pack Lacquer, One Component Varnish from Maydos Eco-Friendly Easy Spraying Nitrocellulose Nc Wood Varnish Lacquer for Furniture
Basic Info.
Model NO.
M8100
Substrate
Wood
Components
Solvent
Paint Film Property
Decoration
Formation Mechanism
Conversion Type
Colors
According to Maydos Color Chart
Application Tools
Brush or Spray Gun
Voc
Without
Smell
Low
Drying Time
Three Hours
Solid Content
50%
Use
Furniture Paint
Trademark
Maydos
Transport Package
3.5kg 16kg
Specification
International Standard
Origin
China
HS Code
32089090
Model NO.
M8100
Substrate
Wood
Components
Solvent
Paint Film Property
Decoration
Formation Mechanism
Conversion Type
Colors
According to Maydos Color Chart
Application Tools
Brush or Spray Gun
Voc
Without
Smell
Low
Drying Time
Three Hours
Solid Content
50%
Use
Furniture Paint
Trademark
Maydos
Transport Package
3.5kg 16kg
Specification
International Standard
Origin
China
HS Code
32089090
Product Desciption
Maydos Eco-Friendly Easy Spraying Nitrocellulose Nc Wood Varnish Lacquer for Furniture
Instructions/application recommendation of painting system:
1. Make sure all the surfaces are clean, dry and free from wax, grese, oil, etc;
2. For bare wood, sand it down in the direction of the grain until it's smooth. Start with 80# sandpaper, and then 150# and finally 220#. Use clean cloth to remove dust between sandings.
3. If you are using paint as the topcoat over another finish, sand the existing finish first with steel wool or synthetic steel wool.
4. Apply a thin coat of paint on the wood and allow it to dry completely. After the first coat is dry, sand it lightly with fine abrasive paper to remove any raised grain.
5. Brush or spray another coat of paint and allow it to dry.
6. Continue to apply coats of paint until you achieve the surface build-up that you desire.
7. Check the finish to see whether there are small nicks or imperfections. Rub out any rough spots with (synthetic) steel wool. Wipe with a clean tack cloth to remove dust. For extra protection, Polish the surface with wax or furniture Polish.
Application Notice:
1. Application methods: Roller, brush or spray.
2. Mixing ratio of matched thinner as below:
3. Wear eye protector and rubber gloves to prevent exposure to paints;
4. This product is highly flammable liquid. Please pay special attention to protecting yourself from sensitization by inhalation or skin contact;
5. This product is for professional use only;
6. More information like manufacture date, Lot No., Net content, Expiring Date and so on, please refer to the product label.
Instructions/application recommendation of painting system:
1. Make sure all the surfaces are clean, dry and free from wax, grese, oil, etc;
2. For bare wood, sand it down in the direction of the grain until it's smooth. Start with 80# sandpaper, and then 150# and finally 220#. Use clean cloth to remove dust between sandings.
3. If you are using paint as the topcoat over another finish, sand the existing finish first with steel wool or synthetic steel wool.
4. Apply a thin coat of paint on the wood and allow it to dry completely. After the first coat is dry, sand it lightly with fine abrasive paper to remove any raised grain.
5. Brush or spray another coat of paint and allow it to dry.
6. Continue to apply coats of paint until you achieve the surface build-up that you desire.
7. Check the finish to see whether there are small nicks or imperfections. Rub out any rough spots with (synthetic) steel wool. Wipe with a clean tack cloth to remove dust. For extra protection, Polish the surface with wax or furniture Polish.
Application Notice:
1. Application methods: Roller, brush or spray.
2. Mixing ratio of matched thinner as below:
| Model | Base | Thinner | Mixing Ration Base: Thinner |
| M8100 | Nitrocellulose Varnish(Glossy) | GMX43 | 1: 1 |
| M8103 | Nitrocellulose Varnish(Semi-Gloss) | GMX43 | 1: 1 |
| M8105 | Nitrocellulose Varnish(Matt) | GMX43 | 1: 1 |
| M8100D | Nitrocellulose Varnish(Primer) | GMX43 | 1: 1 |
3. Wear eye protector and rubber gloves to prevent exposure to paints;
4. This product is highly flammable liquid. Please pay special attention to protecting yourself from sensitization by inhalation or skin contact;
5. This product is for professional use only;
6. More information like manufacture date, Lot No., Net content, Expiring Date and so on, please refer to the product label.
You Might Also Like
Stainless Steel 7X7 Wire Rope
Colorful Automotive Heat Shrinkable Tube Thin Wall Heat Shri......
Custom China Manufacturer Soft and Comfortable Bathrobes Tow......
Dtf Printer Heat Transfer Film Printing Machine
Qt5-15 Automatic Cemetn Solid Brick Machine Concrete Hollow ......
Vertical Washing Powder/ Granular Bag Packing and Sealing Ma......
High Efficiency Customized H11 H12 H13 H14 HEPA Filter for A......
99.5% Purity Ammonium Sulfamate
Eternal High Quality Tungsten Carbide Face Milling Insert fo......
New Best Fashion 3D Zero Gravity Double SL-Shaped Full Body ......
Leisure Life Jacket for Fishing Kayaks and Recreation Kayaks
Double-Head Semi-Automatic Carton Box Stitcher