Environmental Friendly Colored Sand Epoxy Floor Paint

China Environmental Friendly Colored Sand Epoxy Floor Paint, Find details about China Epoxy Paint, Epoxy Coating from Environmental Friendly Colored Sand Epoxy Floor Paint

Model NO.
JD-608
Substrate
Cement
Components
Solvent
Formation Mechanism
Conversion Type
Use
Floor Coatings
Colors
Base on Color Chart
Hardeness
2h-4h
Smell
Low
Voc
Low
Weather Resistance
Excellent
Anti-Resistant
Excellent
Trademark
Maydos
Transport Package
20kg
Specification
International Standard
Origin
China
HS Code
3209909000
Model NO.
JD-608
Substrate
Cement
Components
Solvent
Formation Mechanism
Conversion Type
Use
Floor Coatings
Colors
Base on Color Chart
Hardeness
2h-4h
Smell
Low
Voc
Low
Weather Resistance
Excellent
Anti-Resistant
Excellent
Trademark
Maydos
Transport Package
20kg
Specification
International Standard
Origin
China
HS Code
3209909000
Environmental Friendly Colored Sand Epoxy Floor PaintEnvironmental Friendly Colored Sand Epoxy Floor Paint

 

Surface preparation

Correct substrate preparation is critical for optimum performance. Surface should be sound, clean, dry and free from loose particles,oil,grease,and other contaminants.

Primer

Prepare a barrel, pour JD-D10A and JD-D10B in it based on 1:1. Stir the mixture well and then apply it with roller or trowel. The reference consumption is 0.15kg/m².The main purpose of this primer is to seal the substrate completely and avoid air-bubbles in the body coat. A second coat may be required depending on the oil absorption condition of substrate. The recoat time is about 8 hours.

Inspection standard for the primer: even film with certain brightness.

Undercoat

Mix WTP-MA and WTP-MB based on 5:1 first, then add quartz powder (1/2 of the mixture of A and B) into the mixture, stir it well and apply with trowel. The consumption quantity of A and B is 0.5kg /sqm. You can do it one coat at one time or two coats at two times. In the second case, the application interval is about 8 hours at 25 degrees. Sand the first layer, clean it and then apply the second layer. After the whole application, wait another 8 hours, grind it, clean the sanding dust and then continue the next procedure.

Inspection standard for the undercoat: Non-sticky to hand, no softening, no nail print if you scratch the surface.

Top coat

Mix JD-2000A and JD-2000 B based on 5:1 and then apply the mixture with spatula. The consumption quantity is 1.0kg/sqm.

Maintenance

5-7 days. Don't put the floor into use or wash it with water or other chemicals.

Environmental Friendly Colored Sand Epoxy Floor Paint