Easy Zero Calibration Electronic Metal Thickness Gauge Car Paint TesterFEATURES
Object of Measuring: This compact gauge can be used for non-destructive coating thickness measurement of non-magnetic coatings, e.g. paint, enamel, chrome on steel, and insulating coatings, e.g. paint and anodizing coatings on non-ferrous metals.
2 in 1 Probe: The internal probe can work on both principles, magnetic induction and the eddy currents. The probe can automatically detect the type of the substrates (Magnetic or not), and calculate the coating thickness and display it fast.
Display: 128*128 dot matrix LCD display, standard menu operations;
Measure Mode: single and continuous available;
Two group mode: direct (DIR) and general(GEN), readings will be lost when power off in DIR mode, and not be lost in GEN mode. 80 readings can be stored for each group;
Calibration: Zero point calibration and multi-point calibration(up to 4 points) for each group;
Data Management: User can recall, delete specified readings, or delete group readings;
Statistics display: Simultaneously display Measuring Value, mean, minimum, maximum and standard deviation;
Three probe mode: auto, magnetic and eddy current;
Alarm: User can set a high or low limit alarm for each group;
Power Save: Power off automatically;
PC Connectable: USB interface to data transmission; Download readings via PC with EasyCoating Software.
  


1. Is the measuring error large?
 •  Enter the menu interface, clear the calibration data; shut down to   restore the factory configuration steps; do zero calibration after booting, (Note: you need to do      zero calibration on the customer's own substrate)

2. Does the measurement screen display overflow?
•   The coating thickness exceeds the measurement range.
•   There is an error and zero calibration is required on the substrate. 
•   Probe fault

3. Measurement no response? 
•   Check if the battery has power.
•   The probe has a fault.
•   Whether the measured material meets the measurement principle.                    

4. Does the measurement show a negative number?
•   It is judged according to the customer's materials whether the machine accuracy is applicable.
•   The calibration did not do well and needs to be recalibrated.

 5. During the measurement process, is it sometimes display F, sometimes display N?
 •  The automatic mode undistinguishable the type of material and it requires manual switching of the measurement principle.

 6. How to do calibration?
 •   Please refer to the zero calibration, point calibration step.

 7. Long press "ZERO" does not respond?
 •  You need to restore the factory settings and then operate.

 8. It can measurement but there is no reading, why?
 •   Confirm whether the mode is in continuous measurement mode 
 •   Check if the beep is broken

1. From raw materials to final products, we have a strict quality control system. Our defective rate is about 0.1%.
2. Our staff is well-trained and educated in this industry, we will save money in the end because of our efficiency and know-how.
3. We have been in business for 10 years and thanks to our R&D department, we always catch the latest trend in the market.
4. With the required certificate and experience after-sales service, there was no issue in the shipment we have arranged.  
5. We have rich experience in handling orders for heavy buyers with the professional process.

       •  Stable raw material purchasing
       •  Favorable order follow-up management
       •  Laudable lead-time & shipment control
       •  Traceable quality evaluation
       •  Flexible payment terms
       •  Remarkable after-sale service
    6. Innovative testing technology is always pursued and to do.
       •  We are first to create the LED display rotated and red backlight alarm in the world.
       •  We are the first one create menu operations for coating thickness gauges in China.  
       •  Software: Dgraph can be so easily used to set up, download data, view graph and output reports.