Full Automatic Blow Molding Machine Making HDPE Two Layer 30L 60L Plastic Cooler Box / Bucket /Drum

China Full Automatic Blow Molding Machine Making HDPE Two Layer 30L 60L Plastic Cooler Box / Bucket /Drum, Find details about China Blow Molding Machine, Drum Making Machine from Full Automatic Blow Molding Machine Making HDPE Two Layer 30L 60L Plastic Cooler Box / Bucket /Drum

Basic Info.

Model NO.

LWB90N

Trademark

Longways

Origin

Zhangjiagang

HS Code

8477301000

Model NO.

LWB90N

Trademark

Longways

Origin

Zhangjiagang

HS Code

8477301000

Product Desciption

The Automatic plastic HDPE open head 120L 200L drum blow molding machine is used to make abs car hollow products , A wide variety of materials can be used for the machine, which are suitable for producing 10-30L PE bottle. Extrusion system using a hard gear reducer and inverter. The die head system adopts central-incoming extrusion die made of special steel, imported hydraulic valve and seal parts with proportional control valve. The control system consists of PLC and Human-machine interface imported from Japan, an automatic temperature control module and imported electrical parts.
Full Automatic Blow Molding Machine Making HDPE Two Layer 30L 60L Plastic Cooler Box / Bucket /Drum

Full Automatic Blow Molding Machine Making HDPE Two Layer 30L 60L Plastic Cooler Box / Bucket /Drum

Blow molding machine parameter

Item	Code item	Parameter	Note
Extruder (Main extruder )	Max capacity	120L
	Main screw	Ø100mm	High-efficiency mixing
	Screw L/D	25-30
	Screw material		38CrMoALA
	Max.Extruder consumption	180-250KG/hr
	Twisting transition method	Electrical machinery,Gearbox,AC motor	Hard gear surface decelerator with AC regulator
	Driving motor	55KW
	Screw rotate speed	5-60r/min
	Ahead /back adjusting	Yes
	Up/ down adjusting	Yes
	Temperature control zone	5
	Heating power	22kw
	Cooling for blower	5
	Cooling function	Yes	Cooling water
Clamping unit (Mold opening/closing unit)	Structure		With three bar timing clamping structure in high speed and high force,to achieve quality products
	Clamping directions	Linear guide	For high precise location for longer service life
	Platen dimension	1100*1100mm	(W*H)
	Max.mold dimension	900*1400mm	(W*H)
	Platen distance	600-1400mm	Min.-Max.
	Clamping force	360-560KN
	Mold thickness stroke	610-750mm
	Fixing pattern of the mold	Mold press platen
	Mold open/close stroke control	Inducing Switch +moving	Discriminate mold opening/closing end, mold opening/closing slow speed
	Light Electric Safety protect		Taiwan
Die head	Form	Accumulator	First in, First out
	Material		38CrMoALA,inner mirror treatment
	Accumulator volume	18L
	Output of injecting	13kg	HDPE,5502
	Max die-pin diameter	450-510mm
	Heating Method		Stainless steel heating ring, precision +1%
	Temperature control zone	5
	Blow-air	Yes
	Adjusting of parison thickness	Yes	MOOG 100 point
	Adjusting method of thickness	Inner mold adjusting+5mm