Main technical parameter:
1. Force range: 50-1000kN Accuracy: 1%
Torque range: 50-6000Nm Accuracy: 1%
2. Bolt size: M12-M36 (include M12, M16, M20, M24, M30, M36)
3. Bolt Min. length:
M12 Min.55mm
M16 Min.70mm
M20 Min.80mm
M24 Min.90mm
M30 Min.120mm
M36 Min.140mm
4. Resolution: 0.5%
5. Control mode: Computer
6. Display: Computer LCD display
7. Data processing: Special measurement and control system
8. Voltage: 380V, 50Hz, 3 phase
9. The implementation of standards: AS NZS 1252.1-2016 AS NZS 1252.2-2016
10. Full English control software
11. For our equipment, we do not automatic do elongation. we currently manual measure elongation by calculation using bolt pitch and rotation.
12. The machine applying rotation on the nut (revolution per minute): 5r/min
13. Warranty usually is 12 months.
14. The lowest load that need to be measured for the M12 size if ~47.0 kN. The machine can handle this as well.
15. The accuracy of rotation angle: ±1%
16. The accuracy of speed of rotation: ±0.5%
17. The rate of rotation speed change from 0 to working speed and from working speed to zero (if available): Servo can set, within 2s
18. Data recording rate (How many readouts per second): ≤50
19. Capability for customized test program: yes
20. The file format for data export : EXCEL (*.xls ; *.xlsx)
21. Does the software have a Wheatstone bridge resistance calibration check on the Load cell and torque transducers: no
22. The software is based on the Microsoft Windows platform
23. The computer Network is capable.