Products

Multi Jet Dry Type Copper-Can Register Water Meter

China Multi Jet Dry Type Copper-Can Register Water Meter, Find details about China Meter Water, Water Meter from Multi Jet Dry Type Copper-Can Register Water Meter

Model NO.
LXSC-15K
Principle
Speed of Water Meter
Medium Pressure
General Water Meter
Work Environment
Dry Water Meter
Stucture
Traditional
Material
Brass
Type
Multi Jet Dry Type
Size
15mm-20mm
Temperature
0 Degrees Celsius to 90 Degrees Celsius
Working Pressure
16 Bar
Dial Reading
0.00002L to 9999 Cubic Meter
Pressure Loss
63
Connecting Standard
Bsp & NPT
Length
165mm/190mm
Trademark
Aimei
Specification
Export Standard
Origin
China
HS Code
9028201000
Model NO.
LXSC-15K
Principle
Speed of Water Meter
Medium Pressure
General Water Meter
Work Environment
Dry Water Meter
Stucture
Traditional
Material
Brass
Type
Multi Jet Dry Type
Size
15mm-20mm
Temperature
0 Degrees Celsius to 90 Degrees Celsius
Working Pressure
16 Bar
Dial Reading
0.00002L to 9999 Cubic Meter
Pressure Loss
63
Connecting Standard
Bsp & NPT
Length
165mm/190mm
Trademark
Aimei
Specification
Export Standard
Origin
China
HS Code
9028201000
Multi-jet Dry Type Vane Wheel Water Meter
It is a multi-jet super dry water meter for residential 
application in sizes 15mm-50mm for cold meter.

Features
Compact design with smaller meter body.
45° inclined register, hot wire tamper proof.
Copper-can register
Magnetic drive mechanism with anti-magnetic protection.
External regulation device

Standards Compliance 
ISO 4064
Directive 2004/22/EC on measuring instruments; 
the European  Standard EN14154+A1+A2: Water Meter; 
the International  Organization of Legal Metrology OIML R-49: 2006(E)

Optional Features 
Several lengths and connections available on request
Non return Valve
Reed switch option

Working Conditions
Water temperature: ≤50ºC for cold water meter  
Water pressure:   ≤1MPa or 1.6MPa optional
                  (10bar or 16bar option)

Accessories
Each meter has one set coupling optional: 2pcs coupling, 2pcs coupling nuts and 2pcs washers.

Installation requirements
The meter should be installed in horizontal position with the direction of the flow as 
indicated by the arrow cast in the meter body with the register face upwards.
Pipeline must be flushed before installation.
The meter should be constantly full of water during operation.

Maximum Permissible Error
In the lower zone from Qmin inclusive up to but excluding Qt is ±5%.
In the upper zone from Qt inclusive up to and including Qs is: cold water meter ±2%.
 
Multi Jet Dry Type Copper-Can Register Water Meter
Multi Jet Dry Type Copper-Can Register Water Meter

You Might Also Like