Stainless Steel Nh3 Cross Flow Evaporative Condenser for Cold Chain
China Stainless Steel Nh3 Cross Flow Evaporative Condenser for Cold Chain, Find details about China Chemical Industry Refrigeration, Ammonia Evaporative Refrigerate Equipment from Stainless Steel Nh3 Cross Flow Evaporative Condenser for Cold Chain
Basic Info.
Model NO.
KEF
Form
Fixed Tube-Sheet
Application Field
Refrigeration
Certification
ISO, CE, SGS
Condition
New
Model
Kef
Water Pump
Large Flow, Low Head
Fan
Low Noise
Casing
Stainless Steel or Galvanized Steel
Coil
Stainless Steel or Galvanized Steel
Nozzle
Qualified PVC and ABS
Drift Lost
0.002%Max
Driven System
Siemens/Weg
Ship
by Container Assembly
Applaication Fields
Chemical Industral
Trademark
CASEN
Transport Package
by Container
Specification
100 ton
Origin
China
HS Code
84198990
Model NO.
KEF
Form
Fixed Tube-Sheet
Application Field
Refrigeration
Certification
ISO, CE, SGS
Condition
New
Model
Kef
Water Pump
Large Flow, Low Head
Fan
Low Noise
Casing
Stainless Steel or Galvanized Steel
Coil
Stainless Steel or Galvanized Steel
Nozzle
Qualified PVC and ABS
Drift Lost
0.002%Max
Driven System
Siemens/Weg
Ship
by Container Assembly
Applaication Fields
Chemical Industral
Trademark
CASEN
Transport Package
by Container
Specification
100 ton
Origin
China
HS Code
84198990
Product Desciption
Stainless Steel NH3 Cross Flow Evaporative Condenser for Cold Chain
GENERAL DESCRIPTION
Evaporative condenser plus unique combined heat transfer system for minimized system-wide energy consumption. This professional combined flow design from CASEN ensures unrivalled efficient heat rejection at the lowest possible energy input.
Axial fan uses half the energy of similar centrifugal fan units.
CASEN fill factory-configured for unrivalled water/air contact and minimal air pressure drop. Guarantees optimal condenser efficiency.
TECHNICAL DATA:
WORK PROCESS
Hot gas discharged from the compressor enters the condenser coil inlets at the top of the unit. Cooled water from the unit basin is pumped through spray distribution nozzles and floods over the condenser coils. Ambient air is simultaneously drawn into the unit at the top in parallel flow with the water through the coil. A portion of the recirculated water evaporates into the air stream, removing heat from the refrigerant and causing it to condense.
The cooled refrigerant liquid drains out of the sloped coil tubes into a pressurized receiver for return to the system. The recirculated water that did not evaporate falls through a crossflow fill section located below the coil. Air is drawn through the side of the unit and fill section, removing additional heat from the water through further evaporation. The cooled water collects in the basin for recirculation over the coil.
ADVANTAGES:
TRANSPORT AND PACKAGES
CERTIFICATION
PROJECT CASE
APPLICATIONS
Evaporative Condenser can be widely used for industry of refrigeration, oil & chemical, power generation and metallurgy.
Such as refrigeration industry, it can be used in the fields of cold chain, bear industry, processing meat, dairy & other foods.
ABOUT US
Since established in 2008, Casen Heat Transfer Co.,Ltd is a professional manufacturer and OEM & ODM supplier of cooling tower.
By now, our company had passed ISO9001, ISO14001 and OHSAS18001.
And we also got 21 patents and certificates of CE, PED & SGS.
Our products had been exported to more than 35 countries and enjoy a good reputation.
We look forward the next reliable cooperator from here.
EXHIBITION
Every time there will be many foreign businessmen stopping to discuss business, after the epidemic will continue to participate in related exhibitions, looking forward to cooperating with you.
WHY CHOOSE CASEN
Design Standards
1.Cooling tower is designed based on the CTI standard.
2.Evaporative Condenser is compliant with the PED and AS3666 standards.
3.Air Cooled Heat Transfer is designed according to the API SID A661 standard.
4.Professional computer selection software(Aspen Exchanger Design and Rating and HTRI), 110% thermal performance capability.
Product Features
1.Stainless steel or the ultra-galvanized steel imported from POSCO Korea can ensure the durable of equipment.
2.With drift loss ≤0.002%, the drift eliminator can save water greatly.
3. Special designed air inlet grille to anti UV and prevent the growth of legionella.
4.Professional fans and pumps make the equipment operating with low noise.
Quality Control
1.Based on ISO quality management, strict quality control from raw materials to accessories.
2.High quality and professional raw material suppliers control.
3.Strictly quality controlling for each production process, tube making, bending, welding…
4.Standard pressure test and thermal performance test before delivery.
Quality Service
1.Standardized size design suitable for container shipping.
2.Factory assembled for easy installation
3.Video free guide installation
4.24 months' long warranty
5.Seven days, 24 hours online service
FAQ
1, Delivery Time
15-40days (depending on stock)
2, Shipping Type
20"GP or 40"HQ container, installation work maximumly finished in workshop, saving Installation Time and Cost.
3, Required Parameters
Use Purpose, Inlet Process Fluid Material, Inlet Fluid Temperature & Flow Rate,
Outlet Fluid Temperature, Ambient Wet Bulb Temperature and Local Power Details
THANKS FOR YOUR TIME,FOR MORE INFORMATION WELCOME TO EMAIL TO ME!
GENERAL DESCRIPTION
Evaporative condenser plus unique combined heat transfer system for minimized system-wide energy consumption. This professional combined flow design from CASEN ensures unrivalled efficient heat rejection at the lowest possible energy input.
Axial fan uses half the energy of similar centrifugal fan units.
CASEN fill factory-configured for unrivalled water/air contact and minimal air pressure drop. Guarantees optimal condenser efficiency.
TECHNICAL DATA:
WORK PROCESS
Hot gas discharged from the compressor enters the condenser coil inlets at the top of the unit. Cooled water from the unit basin is pumped through spray distribution nozzles and floods over the condenser coils. Ambient air is simultaneously drawn into the unit at the top in parallel flow with the water through the coil. A portion of the recirculated water evaporates into the air stream, removing heat from the refrigerant and causing it to condense.
The cooled refrigerant liquid drains out of the sloped coil tubes into a pressurized receiver for return to the system. The recirculated water that did not evaporate falls through a crossflow fill section located below the coil. Air is drawn through the side of the unit and fill section, removing additional heat from the water through further evaporation. The cooled water collects in the basin for recirculation over the coil.
ADVANTAGES:
1.Eco-Friendly, Suitable to Low-Charge Ammonia System
2.Single equipment capacity range 50RT to 5000RT
3.Modular cells structure design, suitable to container shipping
4.Factory assembled for maximal installation convenience
5.Optimized structural design, Anti scaling, Energy and water saving,
6.Larger door and access easy for inspection and maintenance
7.Special customized axial-flow fans and pumps, maintenance free
8.Reliable Driven System, WEG/Siemens/TECO fan and pump motors
9.Multiple corrosion resistant material optionable
10.Personal customization solution for automatical control, low noise, energy saving etc. 11.Warranty 24 month
2.Single equipment capacity range 50RT to 5000RT
3.Modular cells structure design, suitable to container shipping
4.Factory assembled for maximal installation convenience
5.Optimized structural design, Anti scaling, Energy and water saving,
6.Larger door and access easy for inspection and maintenance
7.Special customized axial-flow fans and pumps, maintenance free
8.Reliable Driven System, WEG/Siemens/TECO fan and pump motors
9.Multiple corrosion resistant material optionable
10.Personal customization solution for automatical control, low noise, energy saving etc. 11.Warranty 24 month
TRANSPORT AND PACKAGES
CERTIFICATION
PROJECT CASE
APPLICATIONS
Evaporative Condenser can be widely used for industry of refrigeration, oil & chemical, power generation and metallurgy.
Such as refrigeration industry, it can be used in the fields of cold chain, bear industry, processing meat, dairy & other foods.
ABOUT US
Since established in 2008, Casen Heat Transfer Co.,Ltd is a professional manufacturer and OEM & ODM supplier of cooling tower.
By now, our company had passed ISO9001, ISO14001 and OHSAS18001.
And we also got 21 patents and certificates of CE, PED & SGS.
Our products had been exported to more than 35 countries and enjoy a good reputation.
We look forward the next reliable cooperator from here.
EXHIBITION
Every time there will be many foreign businessmen stopping to discuss business, after the epidemic will continue to participate in related exhibitions, looking forward to cooperating with you.
WHY CHOOSE CASEN
Design Standards
1.Cooling tower is designed based on the CTI standard.
2.Evaporative Condenser is compliant with the PED and AS3666 standards.
3.Air Cooled Heat Transfer is designed according to the API SID A661 standard.
4.Professional computer selection software(Aspen Exchanger Design and Rating and HTRI), 110% thermal performance capability.
Product Features
1.Stainless steel or the ultra-galvanized steel imported from POSCO Korea can ensure the durable of equipment.
2.With drift loss ≤0.002%, the drift eliminator can save water greatly.
3. Special designed air inlet grille to anti UV and prevent the growth of legionella.
4.Professional fans and pumps make the equipment operating with low noise.
Quality Control
1.Based on ISO quality management, strict quality control from raw materials to accessories.
2.High quality and professional raw material suppliers control.
3.Strictly quality controlling for each production process, tube making, bending, welding…
4.Standard pressure test and thermal performance test before delivery.
Quality Service
1.Standardized size design suitable for container shipping.
2.Factory assembled for easy installation
3.Video free guide installation
4.24 months' long warranty
5.Seven days, 24 hours online service
FAQ
1, Delivery Time
15-40days (depending on stock)
2, Shipping Type
20"GP or 40"HQ container, installation work maximumly finished in workshop, saving Installation Time and Cost.
3, Required Parameters
Use Purpose, Inlet Process Fluid Material, Inlet Fluid Temperature & Flow Rate,
Outlet Fluid Temperature, Ambient Wet Bulb Temperature and Local Power Details
THANKS FOR YOUR TIME,FOR MORE INFORMATION WELCOME TO EMAIL TO ME!
You Might Also Like
Triac 0-10V Dali Dimmable Recessed LED Downlight/ COB LED Ce......
GMP Factory Supply Food Grade Phycocyanin Spirulina Extract
Table Tennis Racket with Rubber + Bag Ping Pong Bat
3mh Cool Giant Fat Inflatable Cat Cartoon for Advertising
Mslfp14 17*17 Wired Box Size X-ray Digital Flat Panel Detect......
Portable Glass Shape Edge Polishing Machine
A4 A3 Paper Wrapping Machine
Stainless Steel Angle Tube Strainer
Sinchold 9220/20/45 Forged Steel Welded Crane Rail Clips
Warehouse Tent Made by Superb Tent
Thyristor Rectified CO2 MIG Mag Arc Welding Machine