Description 
MPM280 Assembled Pressure Sensor is produced by putting basic pressure sensor into the housing with standard or special thread;. The pressure port thread can be face type seal or waterline seal due to your requirement. With flexible construction and strict inspecting and screening, the assembled MPM280 pressure sensor has similar application with general type sensor, and can be used for mounting and production of different pressure instruments.

Electric Connection:

Power supply:  ≤2.0mADC; ≤10V DC

Electric connection:  Kovar pin or 100mm silicon rubber flexible wires  

Common mode voltage output: 50% of input (typ.) 

Input impedance: 3kΩ~8kΩ 

Output impedance: 3.5kΩ~6kΩ  

Response (10%~90%): <1ms

Insulation resistor: 100MΩ, 100VDC 

Overpressure: 1.5 times FS

Construction Specification

Diaphragm: Stainless steel 316L    Titanium TA1 (MPM280 Ti)      Tantalum Ta (MPM280 TH)

Housing:     Stainless steel 316L     Titanium TC4 (MPM280 Ti)     Hastelloy C (MPM280 TH)

Pin:   Kovar

O-ring: Viton

New weight: ~ 23g     (General)

                    ~ 50g     (Flush diaphragm)

                    ~ 125g   (Assembled)

                    ~ 13.5g  (MPM280 Ti)

Environment Condition

Position effect: deviate 90°  from any orientation, zero change ≤0.05%FS

Shock:  no change at 10gRMS, (20~2000)Hz

Impact: 100g, 11ms

Media compatibility: the gas or liquid which is compatible with construction material and Viton

  
 Workig Condition

Media temperature: (25±1)°C

Environment temperature: (25±1)°C

Shock: 0.1g (1m/s/s) Max

Humidity:  (50%±10%) RH 

Local air pressure:  (86 ~ 106) kPa

Power supply: (1.5±0.0015)mADC 

Order guide: