Products

Automatic Non-Tray Heat Shrink Packing Machine

China Automatic Non-Tray Heat Shrink Packing Machine, Find details about China Wrapping Machine, Shrink Machine from Automatic Non-Tray Heat Shrink Packing Machine

Model NO.
TB series
Type
PE Shrink Film Machine
Heating Mode
Stainless Steel Heating
Packaging Material
Film
Power
by Order
Certificate
ISO9001
Warranty
2 Years
Status
New
Quality
High
Control Mode
PLC
PLC
Mitsubishi
Trademark
Beyond
Transport Package
Wooden Cases
Specification
CE/SGS
Origin
China, Zhangjiagang
HS Code
8422302900
Model NO.
TB series
Type
PE Shrink Film Machine
Heating Mode
Stainless Steel Heating
Packaging Material
Film
Power
by Order
Certificate
ISO9001
Warranty
2 Years
Status
New
Quality
High
Control Mode
PLC
PLC
Mitsubishi
Trademark
Beyond
Transport Package
Wooden Cases
Specification
CE/SGS
Origin
China, Zhangjiagang
HS Code
8422302900
Automatic non-tray heat shrink packing machine
Automatic Non-Tray Heat Shrink Packing Machine
 

This labeling machine is mainly for PVC, PET. OPS label, belongs to sleeve labeling machine

Ranges: Mineral water, beverage, beer, wine, medicine bottles group packing without bottom tray. Your products will look better and firmer after packing.

Main Parameter
1. Suitable electrical source: 50Hz/380V, three phase, five wire stype
2. Power: Prox28KW.
3. Working air pressure: Dry air ≥ 0.6MPa, air consumption: 25m3/H.
4. The packing speed: 20-25bag/minute.
5. The material of bottle: Glass bottle \pop can \PET and heat-resistance temperature 200° And other materials.
6. Suitable bottle diameter: Φ 60-90Φ Mm, height≤ 330mm.
7. The packing material: PE hot shrinking film, thickness: 0.03-0.10mm, the max width of film: 600mm
8. The weight of whole machine: 1.5tonp
9. Heat shrinking passage dimension(L*W*H): 3700*920*1800
The thickness of shrink film0.03- 0.10mm (Can be designed as your special requirements)
The film' s max width:600mm
Shrinkable bake temperature:Can be arbitrary adjustable within room temperature~200  Celsius degree
The max packing speed:8-12 packs/min (suits for your 5L, 2 bottles in one package) 
Power supply:
380V/220V 50Hz three-phase five-line
PowerAbout 16kW
Working air pressure:Dry air ≥ 0.5MPa
Air consumption25m3/h
Conveyor level height, the position of enter material and dimensionDesign as the customer' s request
Packaging type:Two sides open, two sides seal
Shrink film:PE, POF, PV etc.
Suitable bottle-typeGlass bottle, pop can, PET bottle and other material which 200   Celsius degree temperature-resistant
Weight:1500kg
Dimension (mm)5950× 4500× 1800mm
 

Service Term
1. Installation
The initial installation is not included with the professional member. All installation with our team must be scheduled at least 4 weeks in advance before actual trip taken. All necessary connectivity must be ready prior the service being scheduled.
 
While our professional member arrives at the site for a completed and final installation, two days training course will be provide to the customer for operation and maintenance procedure. The initial installation is provided within 5 working days  . The actual installation days many vary, based on different machine mode and packing lines. Each day of working hour consist at 8 working hours. Any additional day will be charge according to our service fee listed below.
 
When initial installation is being called for our professional member required, the surcharge will be made advance by the purchase at US$80/person/day plus all travel expenses. Travel expenses include documentation fees visa charge); local and destination transportation charges  air, train, ferry, bus, taxi or any means of transportation required to arrive to/from destination); accommodation (minimum of 3 star hotel facility) and 3 daily hot meals.
 
2. Translator
If translator is required and can't be provided by purchaser then we will provide a translator for same charge as initial installation stipulated above. All communicate with our engineer should be in Chinese. Any translation provide by us will be based between English and Chinese only. Purchaser is responsible for the translation between local language and English.

Commercial Terms
1. Warranty
All parts are under two Year Warranty with defects from manufacturer. Any other defect caused by human error, mishandling, wear-and tear & any foreseeable conditions will not be covered by this warranty. All electronic parts and component can be guaranteed by original part's manufacturer or our company.
 
2. Payment
30% of the total contract amount is to be T/T into assigned account at the period of 5 working days after the Purchase contract is signed.
70% of the balance must to be made via T/T of the remainder balance amount of the purchase contract before the ordered equipment is to be delivered 10 working days prior of the shipment.
We also accept L/C payment, 30% down payment, and 70% L/C at sight
 
 
Automatic Non-Tray Heat Shrink Packing Machine
Automatic Non-Tray Heat Shrink Packing Machine

 

You Might Also Like