Automatic Copper Tube Straightening, Chipless Cutting and End Flaring Machine

China Automatic Copper Tube Straightening, Chipless Cutting and End Flaring Machine, Find details about China Copper Tube Straightening & Cutting Machine, Copper Tube Straightening & Flaring Machine from Automatic Copper Tube Straightening, Chipless Cutting and End Flaring Machine

Basic Info.

Model NO.

KLG10-2x2

Cutting Stations & Cutting Tubes

Cutting Speed

6 Cuts/Min @Length 600mm

Straightness Tolerance

Less Than 0.2%

Cut-to-Length Error

Less Than 0.3mm @1000mm Length

Length Difference Between Two Tubes

Less Than 0.5mm

Trademark

Zhenhuan

Transport Package

Sea Worthy Wooden Case

Specification

for max. copper tube diameter 10mm

Origin

China

HS Code

8462219000

Model NO.

KLG10-2x2

Cutting Stations & Cutting Tubes

Cutting Speed

6 Cuts/Min @Length 600mm

Straightness Tolerance

Less Than 0.2%

Cut-to-Length Error

Less Than 0.3mm @1000mm Length

Length Difference Between Two Tubes

Less Than 0.5mm

Trademark

Zhenhuan

Transport Package

Sea Worthy Wooden Case

Specification

for max. copper tube diameter 10mm

Origin

China

HS Code

8462219000

Product Desciption

I Description of NC coil copper tube straightening cutting and flaring machine

This machine is for straightening coil copper pipes, detecting length, burrless cutting and flaring one tube end automatically.
This machine adopts pull-apart cutting technology which is the most advanced cut-off method in the world, which eliminates or minimizes pipe ID reduction that could occured and brings burr-less cutting result as well.
This machine has two cutting stations, each station can cut two same size pipes simultanenously. Pipe size in two stations can be different.

II Main features of NC coil copper tube straightening cutting and flaring machine
- Integrated straightening, cutting and flaring together, saving labor and transmitting cost
- Servo feeding, stable and high re-positioning precision
- One time cutting four pieces, high efficient
- Adopting pull-apart technology, less pipe end ID reduction ratio
- Orbited cutter with spray lubricant, burrless cutting
- PLC control, high automation-auto feed, auto cut, auto unload, auto alarm.

III Main technical data of NC coil copper tube straightening cutting and flaring machine

No.	Item	Data
1	Suitable copper tube	Coil, TP1/2 (M/M2)
2	Suitable copper tube diameter range	Ф4.0~Ф10.0mm
3	Suitable copper tube wall thickness	0.2~0.7mm
4	Cutting length range	40mm~ unlimited
5	Pay-off device	4, passive
6	Copper coil reel size	unlimited
7	Cutting station	2 x 2
8	Cutting speed	6 cuts per minute (@L=600mm)*
9	Feeding speed	Max. 0.5m/s
10	Max. Takt time	7 seconds
11	Straightness tolerance	≤2‰
12	Cut-to-length tolerance	≤0.3mm /1000mm
13	Length difference between two tubes	≤0.5mm
14	Pipe end ID reduction ratio	f < 25%*
15	Out-of-roundness of finished end	≤1% of tube diameter
16	Coaxiality between end and tube center	less than 0.1mm
17	Compressed air	0.5-0.7MPa
18	Total electric consumption	6kW

* 1- 2+2 means there are two separate driving system for cutting 2 pairs tubes in different diameter and different length.
* 2- When cutting length is less than 100mm, there will be no pre-stretching function.
* 3- Pipe end ID reduction ratio means: f= (d₁-d₀)/d₀%
Automatic Copper Tube Straightening, Chipless Cutting and End Flaring Machine

Automatic Copper Tube Straightening, Chipless Cutting and End Flaring Machine

IV Factory facility assuring copper tube straightening cutting and flaring machine quality
Automatic Copper Tube Straightening, Chipless Cutting and End Flaring Machine

We, Nantong Zhenhuan Trade Co., Ltd, established in 2004, is specialized in machine solutions for many years. We can provide good quality machines for air conditioner and heat exchanger production.
Automatic Copper Tube Straightening, Chipless Cutting and End Flaring Machine