China Top Five-Maydos Nitrocellulose (NC) Wood Furniture Lacquer Varnish Coating
China Top Five-Maydos Nitrocellulose (NC) Wood Furniture Lacquer Varnish Coating, Find details about China Sanding Sealer, Wood Sanding Sealer from China Top Five-Maydos Nitrocellulose (NC) Wood Furniture Lacquer Varnish Coating
Basic Info.
Model NO.
M8100
Substrate
Wood
Components
Solvent
Paint Film Property
Decoration
Formation Mechanism
Conversion Type
Colors
According to Maydos Color Chart
Application Tools
Brush or Spray Gun
Voc
Without
Smell
Low
Drying Time
Three Hours
Solid Content
50%
Use
Furniture Paint
Trademark
Maydos
Transport Package
3.5kg 16kg
Specification
International Standard
Origin
China
HS Code
32089090
Model NO.
M8100
Substrate
Wood
Components
Solvent
Paint Film Property
Decoration
Formation Mechanism
Conversion Type
Colors
According to Maydos Color Chart
Application Tools
Brush or Spray Gun
Voc
Without
Smell
Low
Drying Time
Three Hours
Solid Content
50%
Use
Furniture Paint
Trademark
Maydos
Transport Package
3.5kg 16kg
Specification
International Standard
Origin
China
HS Code
32089090
Product Desciption
China Top Five-Maydos Nitrocellulose (NC) Wood Furniture Lacquer Varnish Coating
Instructions/application recommendation of painting system:
1. Make sure all the surfaces are clean, dry and free from wax, grese, oil, etc;
2. For bare wood, sand it down in the direction of the grain until it's smooth. Start with 80# sandpaper, and then 150# and finally 220#. Use clean cloth to remove dust between sandings.
3. If you are using paint as the topcoat over another finish, sand the existing finish first with steel wool or synthetic steel wool.
4. Apply a thin coat of paint on the wood and allow it to dry completely. After the first coat is dry, sand it lightly with fine abrasive paper to remove any raised grain.
5. Brush or spray another coat of paint and allow it to dry.
6. Continue to apply coats of paint until you achieve the surface build-up that you desire.
7. Check the finish to see whether there are small nicks or imperfections. Rub out any rough spots with (synthetic) steel wool. Wipe with a clean tack cloth to remove dust. For extra protection, Polish the surface with wax or furniture Polish.
Application Notice:
1. Application methods: Roller, brush or spray.
2. Mixing ratio of matched thinner as below:
3. Wear eye protector and rubber gloves to prevent exposure to paints;
4. This product is highly flammable liquid. Please pay special attention to protecting yourself from sensitization by inhalation or skin contact;
5. This product is for professional use only;
6. More information like manufacture date, Lot No., Net content, Expiring Date and so on, please refer to the product label.
Instructions/application recommendation of painting system:
1. Make sure all the surfaces are clean, dry and free from wax, grese, oil, etc;
2. For bare wood, sand it down in the direction of the grain until it's smooth. Start with 80# sandpaper, and then 150# and finally 220#. Use clean cloth to remove dust between sandings.
3. If you are using paint as the topcoat over another finish, sand the existing finish first with steel wool or synthetic steel wool.
4. Apply a thin coat of paint on the wood and allow it to dry completely. After the first coat is dry, sand it lightly with fine abrasive paper to remove any raised grain.
5. Brush or spray another coat of paint and allow it to dry.
6. Continue to apply coats of paint until you achieve the surface build-up that you desire.
7. Check the finish to see whether there are small nicks or imperfections. Rub out any rough spots with (synthetic) steel wool. Wipe with a clean tack cloth to remove dust. For extra protection, Polish the surface with wax or furniture Polish.
Application Notice:
1. Application methods: Roller, brush or spray.
2. Mixing ratio of matched thinner as below:
| Model | Base | Thinner | Mixing Ration Base: Thinner |
| M8100 | Nitrocellulose Varnish(Glossy) | GMX43 | 1: 1 |
| M8103 | Nitrocellulose Varnish(Semi-Gloss) | GMX43 | 1: 1 |
| M8105 | Nitrocellulose Varnish(Matt) | GMX43 | 1: 1 |
| M8100D | Nitrocellulose Varnish(Primer) | GMX43 | 1: 1 |
3. Wear eye protector and rubber gloves to prevent exposure to paints;
4. This product is highly flammable liquid. Please pay special attention to protecting yourself from sensitization by inhalation or skin contact;
5. This product is for professional use only;
6. More information like manufacture date, Lot No., Net content, Expiring Date and so on, please refer to the product label.
You Might Also Like
10OZ Cotton Polyester Spandex For Jeans
Auto Wiper Motor for Renault Master, 7701050898
Indoor Commercial Trampoline Center for Shopping Mall
Neonpro Series Black White Transparent Straight Type Sleeve ......
Reliable DDP Railway Shipping From Yiwu Shenzhen to EU DDP t......
Ont T24 Plank Support Bench Press, Chest Push Bench Fitness ......
Large Capacity Fashion Stylish Gift Women Ladies Work Shoppi......
New Factory Price High Quality Pin Type Forklift Forks for S......
Natural Birch Wood Double Pointed Sticks
Prefabricated Steel Structure House Project for Logistics Ce......
OEM ODM Customized Home Workout Equipment Resistance Band fo......
Nonwoven Fabric Best Cheap Painter Absorbent Cotton Fleece