Low Price Laboratory Autoclave for Composite/Rubber Curing

China Low Price Laboratory Autoclave for Composite/Rubber Curing, Find details about China Rubber Curing Autoclave, Composite Curing Autoclave from Low Price Laboratory Autoclave for Composite/Rubber Curing

Model NO.
diameter from 1m to 3m
Trademark
Effort
Specification
diameter from 1 to 3m
Origin
China
Model NO.
diameter from 1m to 3m
Trademark
Effort
Specification
diameter from 1 to 3m
Origin
China
Low Price Laboratory Autoclave for Composite/Rubber Curing

It is mainly used for rubber products curing rubber desulphurization, wire, cable, tape, rubber rollers and other rubber products vulcanization. styrene-butadiene rubber thermoplastic refining, drying wood, shoes, Chinese medicine sterilization, oxidation of aluminum products, carbonization of bamboo products, Also widely used in the gypsum and its products and other materials autoclaving.
Our equipment which has advantages of stable and reliable performance is a new type of vulcanizing vessel, the temperature, pressure and time can be controlled automatically and it also easy to operate. And the equipment can save 30% of energy than other traditional equipment. 
Low Price Laboratory Autoclave for Composite/Rubber Curing

Low Price Laboratory Autoclave for Composite/Rubber Curing

Working principle for steam hot-air vulcanizing autoclave
    The steam enter into the cooling fin which in the tank of the steam hot-air vulcanizing by two sets of automatic valve. The cooling finds arrangement in the tank according to the certain rules. The draught fan which in the back of the tank make the quantity of heat spread evenly by special temperature cycle plates. Heat cycle form even temperature field. Thus it can prevent the different quality of the product because of the uneven temperature and pressure. After set working procedures, the heating, heat preservation, vulcanization and etc can be finished by automatic control system. The equipment stop working and give alarm after all procedures finished.
Low Price Laboratory Autoclave for Composite/Rubber Curing
Low Price Laboratory Autoclave for Composite/Rubber Curing

Working principle for electricity hot-air vulcanizing autoclave
      Electric heated tubes which controlled by N groups of separate switch are arranged in the bottom of the tank according to certain rules. Only keep one or two groups of electric heated tubes working after reached working temperature, so it can save the energy and reduce the cost greatly. The temperature of the tank evenly and the pressure has no error, so it can prevent the different quality of the product because of the uneven temperature and pressure. After set working procedures, the heating, heat preservation, vulcanization and etc can be finished by automatic control system. The equipment stop working and give alarm after all procedures finished.
Low Price Laboratory Autoclave for Composite/Rubber Curing


 

Inside Diameter(m)

Φ1.0-3.0

Inside Length(m)

1-10

Max. design pressure(Bar)

10

Working pressure(Bar)

7

Design temperature(ºC)

180

Working temperature(ºC)

150

Working medium 

Hot air(electricity)or steam

Heating power(KW)

15-75 kw

Electricity

380V, 50HZ, 3-phases/220V/440V

Quick closing door system

Equipped


Thanks so much for you taking time to browse our Rubber Curing Autoclave: