Products

IEC62055-31 UC2 Standard Single Phase Latching Relay EV Charger Relay

China IEC62055-31 UC2 Standard Single Phase Latching Relay EV Charger Relay, Find details about China Magnetic Contactor, Latching Relay from IEC62055-31 UC2 Standard Single Phase Latching Relay EV Charger Relay

Model NO.
IM601
Protective Characteristics
Enclosed Rlay
Action Principle
Electromagnetic Type
Size
Miniature
Type
Electric Parameter Relay
Product Name
UC2 Standard Single Phase Latching Relay
Contact Material
Agsno2
Rated Load
60A, 250VAC
Coil Voltage
6~48VDC
Color
Black
Trademark
IVY
Transport Package
Cartons/Pallet
Specification
39*15.5*16.5mm
Origin
Zhejiang, China
HS Code
8536411000
Model NO.
IM601
Protective Characteristics
Enclosed Rlay
Action Principle
Electromagnetic Type
Size
Miniature
Type
Electric Parameter Relay
Product Name
UC2 Standard Single Phase Latching Relay
Contact Material
Agsno2
Rated Load
60A, 250VAC
Coil Voltage
6~48VDC
Color
Black
Trademark
IVY
Transport Package
Cartons/Pallet
Specification
39*15.5*16.5mm
Origin
Zhejiang, China
HS Code
8536411000
IEC62055-31 UC2 Standard Single Phase Latching Relay EV Charger RelayIEC62055-31 UC2 Standard Single Phase Latching Relay EV Charger Relay
Basic DataDimension(mm)38×30×16.5
Weight ( g )≈33g
Contact Arrangement1A/1B
Contact MaterialAgSnO2
Ambient Temperature-40~+70ºC
Ambient Humidity45%~90%RH
Vibration10~55Hz,1.5mm(DA)
Specification DataNominal Voltage6~48VDC
Power ConsumptionSingle Coil:1.5W, Dual Coil:3W
Max. Switching Voltage250VAC
Max. Switching Current60A
Max. Switching Power15000 VA
Contact Resistance<1.5 mΩ
Insulation Resistance1000MΩ(DC 500V)
Dielectric Creepage10mm
Dielectric StrengthAcross Open Contact>1500VAC   1min
Coil to Contact>4000VAC   1min
Electrical Life>10,000cycles
Mechanical Life>100,000cycles
Picking-up & Release Time<=20ms
Pulse Duration>=100ms
Functional Shock Resistance10G
Destructive Shock Resistance100G
IEC62055-31 UC2 Standard Single Phase Latching Relay EV Charger RelayIEC62055-31 UC2 Standard Single Phase Latching Relay EV Charger RelayIEC62055-31 UC2 Standard Single Phase Latching Relay EV Charger Relay
Cautions of Latching Relay:

1.Suggestions of relay's input
(1)Polarity-Please check the polarity inside of our technical specification, if single coil then"+ -" or "- +"are fine,
you can change it by one pulse.If double coil then it's necessary to confirm "-+-" or "+-+"before leaving the our factory.
(2)Driving-Please energize the relay at our recommend pulse width, rated voltage for reliable performance, if 1.5
times or 2 times of value or lower driving condition plz confirm with our engineer.
(3)Relays'contact status may be changed during transportation or installation due to impact of external force,
therefore please reset to the required status.
 
2.Suggestions of relay's output
(1)When choosing the relay with hard connection,please avoid the external force on load terminals during or after
the installation.
(2)When the relay will be connected with screw or bolts to the relays' terminals, plz make sure your connection is
fastened and prevent relay from damages or other safety problems due to temp. Rise..
(3)The sampling signal wires of products are limited, please do not pull or torque during installation.
 

You Might Also Like