Products

Factory Supply N95 Mask Making Machine for N95 1860 N95 Face Mask Respirator
Factory Supply N95 Mask Making Machine for N95 1860 N95 Face Mask Respirator

Factory Supply N95 Mask Making Machine for N95 1860 N95 Face Mask Respirator

China Factory Supply N95 Mask Making Machine for N95 1860 N95 Face Mask Respirator, Find details about China N95 Face Mask Machine, N95 Face Mask Making Machine from Factory Supply N95 Mask Making Machine for N95 1860 N95 Face Mask Respirator

Model NO.
OYD-N95-AFOM-10-C
Voltage
AC220V
Powder
4.5kw (Optional)
Compressor
0.6~0.8MPa 6-8kg
Capacity
35PCS/Minute
Weight
1050kg
Qualification Rate
98-99%
Equipment Failure Rate
2%
Trademark
OYADE
Transport Package
Sea and Air Transport
Origin
China
Model NO.
OYD-N95-AFOM-10-C
Voltage
AC220V
Powder
4.5kw (Optional)
Compressor
0.6~0.8MPa 6-8kg
Capacity
35PCS/Minute
Weight
1050kg
Qualification Rate
98-99%
Equipment Failure Rate
2%
Trademark
OYADE
Transport Package
Sea and Air Transport
Origin
China

Product introduction and principle

OYD-N95-AFOM-10 mask machine is a machine for produce folding masks. It can achieve complete automation from raw materials to qualified complete products, and is easy to adjust and control by PLC. Products from the manufacturing industry have a certain filtering effect on the air entering the lungs of the human body, and also have a very good protective effect when working in a polluted environment such as dust when respiratory infections are prevalent.


Factory Supply N95 Mask Making Machine for N95 1860 N95 Face Mask Respirator


This machine is mainly used for N95 automatic forming: After unwinding the whole roll of material, it is loaded by roller driving. The cloth is automatically loaded, and the bridge of the nose bridge is pulled and unrolled. The mold is roll-welded to the edge band, cut and shaped by a rolling knife, and the forming mask is conveyed through the back roller, and the edge band is automatically sealed and the ear band is automatically welded;

Factory Supply N95 Mask Making Machine for N95 1860 N95 Face Mask Respirator
specification

  1. Model: OYD-N95-AFOM-10
  2. Voltage: AC220V
  3. Powder: 4.5kw (Optional)
  4. Compressor: 0.6~0.8MPA(6-8kg)
  5. Capacity: 35pcs/minute
  6. Size:7.46m*1.2m*1.9m(Height)
  7. Weight: 1050kg
  8. Equipment production qualification rate: 98-99% (except that the incoming materials do not meet the requirements, except for improper operation by employees)
  9. Equipment failure rate: 2% (refers to the failure caused by the equipment itself)

Finished product
Model Numbern95 mask
n95 mask ColorWhite 
Materialnon-woven, soft cotton, melt blown filter
TypeAntibacterial
Functionanti-corona virus / prevent flu / anti smoke / dust

Factory Supply N95 Mask Making Machine for N95 1860 N95 Face Mask Respirator


 Enviornment requirement
  1. Color:Computer white paint or hard-plated inscription, oxidized color, stainless steel color, according to this standard without special instructions.
  2. Machine Weight: ≤500kg Ground load requirements ≥300kg /
  3. Voltage: AC220V±5%,50HZ,Power 6.5-8.5kw
  4. Enviornment requirement: Temperature:10ºC~35ºC, Humidity: 5-35%HR,no flammable, no corrosive gas, no dust. (cleanliness no less than 100000)
  5. Keep away from paint (gasoline), chemicals, acids, alkalis, and explosive or flammable materials.
  6. Avoid proximate to machines that generate vibration.
  7. Ambient lighting: above 300LUX.
Raw material specification
Factory Supply N95 Mask Making Machine for N95 1860 N95 Face Mask Respirator
 
 

item
Number of hanging shafts
width 		mm
Coil outer diameter		mm barrel inner diameter
Weight


Non woven
Melt blown Fabric		4 260 Φ600Φ76.2Max 15 kg
//
Nose bridge strip
Steel wire covered plastic / pure steel wire / full plastic		1 3-7 Φ400Φ76.2Max 25 kg

Ear loop		2 bags160*3  10 N
Factory Supply N95 Mask Making Machine for N95 1860 N95 Face Mask Respirator

After sale service system
Factory Supply N95 Mask Making Machine for N95 1860 N95 Face Mask Respirator

1.Commission and testing
Providing the debugging materials, the installation and commissioning are completed within two days;
2.workers training
Equipment assembly training-Training of equipment personnel for the assembly and maintenance of equipment. Mass production training-traning on handling various issues during mass production
3.After-sales service:
1)The warranty period of the equipment is 6 months,Within five years after the expiration of the warranty period. The seller shall still be responsible for the repair and maintenance of the equipment
2) Online problem solving Respond within 8 hours, and give a solution within 24 hours,resolved within 48 hours
4.Follow-up service Provide services to help customers purchase raw materials and accessories We have been mainly engaged in the sales of machinery since 2008. So for the whole process of the production line from negotiation, contract signing;Production;Inspection, delivery;Installation; after-sale services and so on, we're all familiar with the whole process.

Our Factory
Shandong Ouyade Machinery has developed the efficient and fully automatic mask production line, which can automatically complete multiple loading and unloading and testing processes, including manual loading rolls, automatic feeding, cutting nose line, ultrasonic welding body piece, cutting body piece, material distribution, and ultrasonic welding ear line , Cutting the ear line, automatic cutting, belt line output and other processes.

Factory Supply N95 Mask Making Machine for N95 1860 N95 Face Mask Respirator
Factory Supply N95 Mask Making Machine for N95 1860 N95 Face Mask Respirator
Factory Supply N95 Mask Making Machine for N95 1860 N95 Face Mask Respirator

 






 




 

You Might Also Like