China Converter Analog Signal to Digital Signal Analog Signal Transmitter 420mA Signal Isolator, Find details about China Digital Signal Level Sensor, DC Voltage Transducer with Signal Output from Converter Analog Signal to Digital Signal Analog Signal Transmitter 420mA Signal Isolator
Technical Parameters | |||||||
Isolated transmission accuracy | ±0.1%F.S(25ºC±2ºC) | ||||||
Response time | ≤50mS | ||||||
Input impedance | ≤100Ω(when input current) ≥300KΩ(when the input is voltage) | ||||||
Temperature drift | 40ppm/ºC | ||||||
Distribution output voltage | No-load voltage ≤26V, full-load voltage ≥23V | ||||||
Output load capacity | 0(4)mA~20mA:≤550Ω:; 0(1)V~5V:≥1MΩ;0V~10V:≥2MΩ | ||||||
Power supply | 18~32VDC(typical 24V DC) 85~265VAC /DC | ||||||
Full load power consumption | 1 input 1 output | 1 input 2 output | 1 input 4 output | 2 input 2 output | |||
24V DC | 0.3W | 0.5W | 1.0W | 0.6W | |||
220V AC | 0.6W | 1.0W | 1.5W | 1.2W | |||
Insulation resistance | ≥100MΩ,600VDC (between input / output / power) | ||||||
Dielectric strength (leakage current 1mA, test time 1 minute) | |||||||
≥1500V AC/DC(between input / output / power) | |||||||
Ambient temperature during operation | −20ºC~+60ºC | ||||||
Electromagnetic compatibility | IEC 61000-4 | ||||||
Panel indicator | PWR: Power indicator (green). |
Product Model List | |||||
HDTD- | X | X | X | X | |
Number of channels | 1 | 1 input 1 output | |||
2 | 1 input 2 output | ||||
3 | 1 input 3 output | ||||
4 | 1 input 4 output | ||||
5 | 2 input 2 outout | ||||
7 | 2 input 4 output | ||||
Input signal | 1 | 4~20mA | |||
2 | 0~20mA | ||||
4 | 0~75mV | ||||
5 | 0~5V | ||||
6 | 0~10V | ||||
S | Other signal | ||||
Output signal | 1 | 4~20mA | |||
2 | 0~20mA | ||||
5 | 0~5V | ||||
6 | 0~10V | ||||
S | Other signal | ||||
Power supply | D | DC 24V default | |||
A | 85-265VAC/DC | ||||
N | DC12V |