Multi-purpose Spray Adhesive  HTL-768
Main Ingredients:

Synthetic resin, synthetic rubber, thicken resin, environment - friendly solvent oil,

butane, propane, dimethylether etc.

Applications:
Used for bonding the surface of lightweight materials such as EPS,
polystyrene foam in the industry of advertising, design, exhibition, clothing.

Charactertics:

1. Fast and aggressive tack and easy application.

2. High solids and spray on larger area, large unit spraying area, it is 1.5 - 2 times of the current similar spray adhesive.

3. The spraying grain is thin and even, low penetration, not corrode materials and save adhesive.

4. 1 - 5 minutes of airing time, is good for improving efficiency.

5. Widely used for the places such as factory, hospital, company and family bonding maintenance.

Precautions:

1. This productis packed under pressure, and is easy to explode when it is near heat.

2. Store away from heat and fire source, or store out of direct sunlight for long time.

3. Please keep the product out of kid's reach.

4. After finish the adhesive inside dump at the place there is no people and puncture the tank wall with iron nail.

5. Store it under 49 ºC in well ventilate and cool place.

6. Contact with eyes, wash with a mount of water and see doctor immediately. Contact with skin, wash with soap and water.

Storage:

2 years in normal temperature. If the adhesive does not go bad after 2 years, it still can be used.

About us: