Products

Thermal Insulation Materials Closed Cell Rigid Foam Polyurethane Spray Foam Polyol and Isocyanate

China Thermal Insulation Materials Closed Cell Rigid Foam Polyurethane Spray Foam Polyol and Isocyanate, Find details about China Polyol, Blend Polyol from Thermal Insulation Materials Closed Cell Rigid Foam Polyurethane Spray Foam Polyol and Isocyanate

Model NO.
SD1215
Core Density
40
Appearance
Liquid
Viscosity
300
Shelf Life
6 Months
Water Absorption
3
Trademark
Shunda
Transport Package
Drum
Specification
220kg/drum
Origin
China
HS Code
3907209000
Model NO.
SD1215
Core Density
40
Appearance
Liquid
Viscosity
300
Shelf Life
6 Months
Water Absorption
3
Trademark
Shunda
Transport Package
Drum
Specification
220kg/drum
Origin
China
HS Code
3907209000
Blend Polyol SD1215
Building Wall Spray Rigid PU Foam
DESCRIPTION
SD1215 building wall insulation system blend polyol is a kind of spray rigid PU foam blend polyol, specially used for the insulation of building external wall. It used together with Isocyanate(PM-200) to make rigid PU foam through PU spray machine. The foam produced has the characteristics as following:
  1. Zero ozone depleting blowing agent
  2. The strong adhesive force, convenient construction and no seams.
  3. The low thermal conductivity, low water absorption and good dimensional stability.
  4. The long service life.
TYPICAL PHYSICAL PROPERTIES
Physical Properities Test MethodMetricValue
Core DensityGB/T 6343-2009kg/m343.3
Compressive StrengthGB/T 8813-2008kPa244
Tensile StrenghtGB/T 9641-88kPa256
Oxygen indexGB/T 2406.2-2009%28.5
Initial Thermal ConductivityGB/T 10294-2008W/(M·K)0.023
Close Cell ContentGB/T 10799-2008%≥90
Water AbsorptionGB/T 8810-2005%≤3
Dimensional Stability
(Foam made After 6 days)		-25ºCGB/T 8811-2008%≤1
≤1
70ºC
Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.
COMPONENT PRODUCT SPECIFICATIONS
 
PACKING SPECIFICATION
220KGS/Drum, Blue paint or Zinc coating drums (Drum Weight: 18-23kg)
STORAGE RECOMMENDATIONS  
Direct contact with SD1232 type blend polyol can lead to moderate eye irritation and mild skin irritation, which can cause skin allergies. Repeated inhalation of high concentration of volatile gas will cause respiratory allergy, and should be treated immediately. Anti- inflammatory and anti-allergic treatment measures should be taken.
Please be careful in the operation to prevent contact with the skin and splash into the eye, please wear the necessary protective equipment (gloves, protective goggles, working clothes, etc.).
Once splashed on the skin or the eye, rinse with water immediately for at least 15 minutes, and the skin is washed with soapy water. Please seek medical treatment immediately after swallowed.

                                                                                      

Notice: This product specification is intended to be used by Shunda Polyurethane Company in order to show sincerity to our customers, while it is not covered by law as a guarantee. Customers can adjust according to the actual operating conditions. If you have any questions, please call our company and we will serve you wholeheartedly.

 

You Might Also Like